Manual Fagor CAT 44NG (page 25 of 104) (English, French, Portuguese, Spanish)

485594

Zoom out

Zoom in

1/104

13.6 Running the Cleaning Program

The cleaning program permits the

intensive cleaning of otherwise inac-

cessible locations. Start the cleaning

program at the latest when you are

instructed by the display indication

«CARRY OUT CLEANING PRO-

CESS».

The cleaning process takes ca.

8 minutes and should not be inter-

rupted.

Before starting the cleaning program,

clean the brewing unit (see „Cleaning

the Coffee-making Unit“ page 49).

Press the „Menu“ key (Fig. 3, f) .

The menu point «LANGUAGE»

appears.

Press the paging keys or (Fig. 3, c

or d) until the menu point «CLEAN»

appears.

Confirm the menu point with the „OK“

key (Fig. 3, g). The display shows

«START CLEANING».

Confirm with the „OK“ key (Fig. 3, g).

The display shows «PREPARE CLE-

ANING».

To prepare for cleaning, follow the

instructions in the display.

•«REFILL WATER – PRESS OK»

Remove the water tank, fill it with

water and replace. Then press the „OK“

key (Fig. 3, g). The unit rinses

2 x automaticity.

•«BEAN CONTAINER

IN POWDER MODE»

This message only appears when the

bean container is in bean mode.

Use only cleaning products recom-

mended by Fagor. To obtain them,

consult your distributor or our

Customer Care Helpline.

2 Clean the brewing unit under

warm running water, particularly

the stainless steel sieves must be

well rinsed and cleaned of coffee

remains. Dip the brewing unit in

hot water to release the dried

coffee remains. Dry the brewing

unit. Fig. 30

3 Inserting the brewing unit: Turn

the brewing unit to the correct

position (the outlet tube faces

forwards and downwards), set the

brewing unit in the guide grooves

and push the brewing unit fully

into the appliance. Fig. 31

4 Close the service door until it locks

audibly into position. Fig. 32

5 Reinsert the coffee grounds

container. Fig. 33

The appliance can only be

switched on if the brewing unit is

set in and the service door is

closed. After switching on the

brewing unit re-adjusts itself, the

normal heating process starts

again. When dispensing coffee for

the first time after cleaning, an

increased amount of water will

access the coffee grounds

container.

Turn the bean container to the position

„Ground coffee“ (Fig. 35).

•«TABLETS IN POWDER HOLDER

– PRESS OK»

Place a cleaning tablet in the powder

holder (Fig. 36). Then press the „OK“

key (Fig. 3, g).

•«WAIT»

•«WASTE CONTAINER

UNDER OUTLET – PRESS OK»

Place the emptied container under the

outlet as shown in Fig. 37.

The container serves as a collecting

vessel for the cleaning fluid.

Press the „OK“ key (Fig. 3, g). The clean-

ing program starts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fagor CAT 44NG in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 10,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fagor CAT 44NG Manual

Product: