Manual Fagor CAT 44NG (page 24 of 104) (English, French, Portuguese, Spanish)

485594

Zoom out

Zoom in

1/104

If a foreign body is impossible to

remove, take off the grinding ring.

To do this, proceed as follows (Fig. 21):

1. Push the Release catch for removing

grinding ring (Fig. 2, U) forward toward

the centre of the grinder.

2. Keep it in this position and turn the

Lever for setting grinding texture (Fig.

2, V) approximately one full turn

clockwise until it comes up against the

stop.

You can continue to turn the Lever for

setting grinding texture (Fig. 2, V) only

if the Release catch for removing

grinding ring (Fig. 2, U) is pressed.

Now release the grinding ring (Fig. 22)

and remove the foreign body or bodies.

Caution! Risk of injury from the spin-

ning grinder. Never switch the coffee

machine on, when you are working on

the grinder. This can lead to severe

injuries. Before starting work, ensure

that the machine is unplugged from

the mains socket.

When refitting the grinding ring,

ensure that both catches on the grind-

ing ring holder engage in the corre-

sponding slots (Fig. 22).

Failure to do this can lead to damage

to the grinder.

Turn the Lever for setting grinding tex-

ture (Fig. 2, V) approximately one full

turn anticlockwise until it comes up

against the stop.

Set the bean container in place at the

„UnlockContainer“ position and

turn it back to the „Coffee Beans“ posi-

tion .

Add a small quantity of coffee beans,

and test the proper operation of the

grinder by making a cup of coffee. The

first time the grinder is used, or after

cleaning, less ground coffee will enter

the coffee-making unit, because the

channel first has to be filled. This can

influence the first cup of coffee.

13.5 Cleaning the Coffee-making Unit

We recommend cleaning the brewing

unit monthly. More frequent cleaning

is recommended if the machine is

used more intensively. If your

appliance is left unused for longer

periods (e.g. holidays), it is necessary

to empty the coffee grounds contai-

ner and the water reservoir.

Before reconnecting clean the

brewing unit thoroughly.

Removing the brewing unit:

Switch off the appliance with button h

“ON/OFF”. The appliance carries out a

rinsing process and asks you subse-

quently to empty the coffee grounds

container.

Pull the coffee grounds container out

of the appliance, empty and clean it.

Fig. 23

Press the unlocking button on the

service door. Fig. 24

The service door opens to the front.

Fig. 25

The brewing unit is located behind

the service door. Fig. 26

Caution! Risk of burning through

hot brewing unit! If you have just

dispensed coffee, then the dispen-

ser could still be hot!

5/6 Remove the brewing unit by

inserting your index finger through

the ring of the coffee dispenser at the

front of the brewing unit and pull the

brewing unit straight forwards.

Prevent the brewing unit with the

other hand from falling. Fig. 27, 28.

Cleaning the brewing unit /

inserting the brewing unit

The brewing unit is open and the

ejection lever folds down. Turn the

brewing unit around. Both stainless

steel sieves are easily accessible now.

Fig. 29.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fagor CAT 44NG in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 10,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fagor CAT 44NG Manual

Product: