499396
19
Zoom out
Zoom in
Previous page
1/35
Next page
19
Now swing the upper section open and closed several times.
You will notice that the upper section is pushed upwards by
the gas pressure springs at the completely open position.
When swinging the upper section downwards it moves easily
downwards after initial slight resistance.
Please take account, however, of the fact that a slight
discrepancy in pressure in the gas pressure spring can
influence the swing movement somewhat.
Assembly of the Duo-body fan (optional)
In order to be able to attach the body fan, first remove the
side surround at the foot of the upper section.
In order to do this please remove the 3 assembly screws
M4 at the right and left outer sides and the centre of the
surround (figure 12).
fig. 12
Please also remove the two centre screws (figure 13).
fig. 13
The body fan can now be attached to the equipment in
this position with the retainer sheet fitted in the upper area
using the two screws that were previously removed (figure
14).
fig. 14
Release screws
Subsequently the side surrounds can be fitted back onto
the upper section and the bed in reverse order.
Please also make sure that the security rings on the ball
sockets click back into place (figure 11). The assembly of
the security rings is very important. The tanning system
may only be used with perfectly fitted gas pressure dampers
and security rings.
fig. 11
Safety ring
Screw on
body fan
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dr. Kern Atlantic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern Atlantic in the language / languages: English, German, Spanish as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info