499396
17
Zoom out
Zoom in
Previous page
1/35
Next page
17
Assembly of the tanning system
The system is delivered in two packing units on a pallet.
Begin the assembly with the lower section of the tanning
bed. Open the box in which the bed is packed at the point
marked "Hier oben" and lift the bed out of the packing. As
the foot sections are already pre-assembled the tanning bed
can stand on the foot sections immediately (figure 1).
Lay a piece of polystyrene from the packaging onto the front
longitudinal support of the bed to act as cushioning before
the upper section is lifted into its correct position above the
bed (figure 4).
Fig. 1
Now open the packing box containing the upper section.
Lift the upper section out of the box and lay it down next to
the bed. Use a layer of material under the equipment as
protection, possibly cardboard or polystyrene pieces from
the packing surrounding the equipment (figure 2).
Fig. 2
Fig. 3
Before assembling the upper section the plastic bearings
from the plastic bag must be inserted from the inside into
the drill holes for the bearing brackets on the right and left of
the upper section (figure 3).
Fig. 4
Now lift the upper section above the bed in such a way that
the front longitudinal supports on the upper section and the
bed are positioned above one another on the cushioning.
Next remove the side surrounds from the bed and the upper
section.
During this process remove the 3 plastic screws M4 (see
figure 5 for an example) on the right and left outer sides of
the surrounds. Use a large screwdriver or a normal coin for
this.
Fig. 5
Assembly screws for side surround
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dr. Kern Atlantic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern Atlantic in the language / languages: English, German, Spanish as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info