499396
21
Zoom out
Zoom in
Previous page
1/35
Next page
21
Timer adjustment
jumper 2
jumper 1
jumper 1 (time period):
opened = maximum period 30 min
closed = maximum period 60 min
jumper 2 (fan delay)
opened = without fan delay
closed = with fan delay
Repair and maintenance
Changing lamps and starters
Remove the main plug before any maintenance work!
The tanning equipment can be operated for many years
with correct use. The lamps have a very long usage period.
In the event that the intensity of the radiation weakens
then this can be strengthened again by exchanging the
UVA low-pressure lamps and the face-tanning lamp.
In the event that a lamp should fail the acrylic sheet must
be removed from the upper or lower section. In order to do
this the surrounding cover must be removed on one side
of the equipment. The acrylic sheet can then be pushed
along in order to free the sheet on the side where the
surround is still fitted.
The acrylic sheets are fitted into the receiver slot of the
longitudinal spar with initial tension. However if the sheet
is push simultaneously backwards and downwards in the
centre of the sheet (upwards for the upper section) towards
the lamps then the sheet is released from the front longi-
tudinal spar and can thus be removed (figure 21).
fig. 21
fig. 20
Try to solve a possible contact problem by gently turning
the defective lamp backwards and forwards. If this is not
successful then there many be a lamp or starter defect,
which can be determined easily by yourself or by an
electrician:
Turn the corresponding lamp 90°, so that it can be removed
from the mounting. When inserting the new lamp first insert
the lower pins, then pass the upper pins into the mounting
and turn the lamp 90°.
In the event that the supposedly defective lamp functions
in another position then the defect could be in the starters.
This can also be tested by carrying out an exchange.
Remove the starter by gently turning it to the left. Insert
the new starter by turning to the right.
Then clean all the lamps and the acrylic glass sheet with
a soft cloth and re-insert the sheet.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dr. Kern Atlantic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern Atlantic in the language / languages: English, German, Spanish as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info