588931
32
Zoom out
Zoom in
Previous page
1/38
Next page
32
In case the heart rate and cadence intervals (with or without the time manager) are used, a second
countdown 2 is initiated automatically after the alarm signal. If this countdown is completed, a short
alarm can be heard and countdown 3 is initiated. After the completion of these countdowns the count-
down starts from countdown 1 again (depending on the preset countdown counter). This lasts as long
as the countdown counter is executed. The countdown can be paused or stopped by pressing the
UM-button again.
Pressing the
UM-button for 3 sec. resets the countdown to the countdown of countdown 1.
The countdown function is also used with the heart rate and cadence time manager (see chap. 8.2)
Autoscroll
Indicates automatically all values in a 3 sec. cycle in the lower display.
7.4 Basic Functions
Light
By pressing the LR-button for 4 seconds the light is turned on for approx. 5 seconds.
Automatic light on
By pressing the
LR-button for 6 seconds the automatic light is turned on. For the next 5 hours the light
will be automatically turned on for 5 seconds when pressing any button.
Automatic light off
By shortly pressing the LR-button and immediately afterwards for 6 seconds the automatic light
function is turned off.
Note: If the light manager is active, at pressing any button the light is turned on only and no function
is executed. While in light mode, you have to press the button again to activate any function. To turn
off the light manager, for example, shortly press LR (light is turned on) and immediately press LR for 6
seconds. So the light manager is turned off.
Attention: Light consumes a lot of battery power, frequent use shortens the life span of the battery
accordingly.
Alarm clock / Alarm
If the set alarm time is reached there is a sound for 20 seconds (switch off by pressing any button).
If the alarm timer is set in the lower left of the display, an alarm symbol will show up. You set and switch
the alarm on/off by the topical, see 6.1 or in the basic settings, see 6.5.
Heart rate alarm
You can switch the heart rate alarm on/off in profile settings (choose ‚Beeper on/off‘) or by pressing UL
for 3 seconds. In the display you see the symbol if the heart rate alarm is on.
If the heart rate alarm is switched on you hear a beep when exceeding the heart rate limit.
Power down mode
(power down mode, see main settings chapter 6)
Your HAC5 can be switch to power down mode which means it doesn’t display anything but keeps all
data stored (except for date and time). This is useful e.g. for battery change but also when the HAC5 is
not used for a longer period.
To set power down mode select in the main settings (press MR for 3 seconds) “powerdown” and
confirm by pressing MR. The display shows
Choose with LR/UR either “powerdown” or “no” and confirm by pressing MR.
To re-start the HAC5 simply press any button.
Autoscroll
Basic Functions
Light
Alarm clock / Alarm
Heart rate alarm
Stromspar-Modus
Lightmngr.
On
For 5 hours
Lightmngr.
Off
HR-Beep
On
HR-Beep
Off
Powerdown
Really?
No
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo HAC 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo HAC 5 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo HAC 5

Ciclo HAC 5 Additional guide - English - 4 pages

Ciclo HAC 5 Additional guide - German - 4 pages

Ciclo HAC 5 Quick start guide - German - 2 pages

Ciclo HAC 5 User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info