480782

Cardo Scala rider G4 Manual

17
Zoom out
Zoom in
Previous page
1/27
Next page
English
9.10a. TWO-WAY INTERCOM
PAIRING OPTIONS BETWEEN TWO PARTICIPANTS
Using two G4s
1. If either G4 is turned OFF, turn it ON by pressing and holding the
Mobile Button until the Blue Light ashes three times.
2. Make sure that both G4s are now ashing slowly in Blue.
3. Choose an available CHANNEL you wish to use to pair the G4
(CHANNEL “A” or CHANNEL “B”).
NOTE: Selecting a CHANNEL that is already in use will override the paired
G4 on that CHANNEL with the newly paired G4.
4. On the
G4
, press and hold the chosen CHANNEL BUTTON (“A” or
“B”) for at least six seconds until the G4’s BLUE or RED Light begins
ashing rapidly, indicating it is in Intercom Pairing mode. (See Table
in 9.10).
5. Repeat Step 3-4 for the second G4.
6. Within a few seconds, both G4s will show a solid light for two
seconds, indicating that the two G4s are now paired, connected
and ready for use.
NOTE: If the Pairing process is not completed within two minutes the G4
will return to Standby mode.
Initiate Intercom calls
There are two ways to start an Intercom call with your paired G4 while the
G4 is in Standby mode:
VOICE CONNECT:
Start talking loudly
Once you start talking loudly, an Intercom call
will be established with the other paired G4.
The Intercom call will stay on until all
participants remain silent for 30 seconds.
CHANNEL BUTTON
CONNECT:
Tap the chosen CHANNEL
Button once to add or
remove the other G4 from
an Intercom call.
9.10b. THREE-WAY INTERCOM
The G4 oers three-way intercom conference connectivity as follows:
First G4
Rider “A”
Third G4
Rider “C”
Second G4
Rider “B”
In this conguration Rider “B” is paired to Rider “A” and to Rider “C”.
IMPORTANT: Since Rider “B” uses two Bluetooth connections during the
conference mode, Rider “B” will be disconnected from the mobile phone
or GPS device until the conference mode is terminated. Upon termination,
Rider “B” will automatically re-connect to his mobile phone or GPS. Rider
“A” and “C” remain connected to their mobile phones or GPS devices
during the 3-way intercom call.
Set-up and conguration three-way intercom connectivity
PAIRING OPTIONS BETWEEN THREE PARTICIPANTS (between G4
models only)
Pairing three G4s is achieved by simply repeating the procedure in
the above section 9.10a with a third paired G4. To pair your G4 with
another two G4s:
1. Pair your G4 with the second G4 as described in section 9.10a
(Using CHANNEL “A”).
2. Pair your G4 with the third G4 as described in section 9.10a
(Using CHANNEL “B”).
Use Channel “B”
Use Channel “A”
17
scala rider
®
G4
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala rider G4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala rider G4 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala rider G4

Cardo Scala rider G4 User Manual - German - 30 pages

Cardo Scala rider G4 User Manual - Dutch - 29 pages

Cardo Scala rider G4 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info