480782
19
Zoom out
Zoom in
Previous page
1/27
Next page
English
Your 4-Way Conference Intercom Pairing is now complete and ready
to use.
NOTE: If the Pairing process is not completed within two minutes the G4s
will return to Standby mode.
Making 4-Way Intercom calls
Once you have successfully paired the four G4s as described above,
and all units are in standby mode, proceed as follows to start a 4-way
Conference Intercom call:
a. Passenger 2 should press Button “B” to initiate a call with
Passenger 4. Wait until audio is heard on both G4s and proceed
to the next step.
b. Driver 1 should press Button A” to initiate a call with Passenger 2.
c. Driver 3 should press Button “A” to initiate a call with Passenger 4.
Now the 4-way intercom conference mode is established.
NOTE: If one of the G4s should disconnect or drop o from the 4-way call and
fails to reconnect, repeat the three steps above in that precise order.
9.11 USING THE G4 FOR INTERCOM WITH OTHER
SCALA RIDER MODELS
9.11a. TWO-WAY INTERCOM WITH SCALA RIDER Q2/Q2 pro
To use your G4 with a Q2 unit, we recommend that you also refer to
your Q2 manual.
1. If either device is turned OFF, turn it ON by pressing and holding
either the Mobile Button for the G4 unit or the CTRL Button for the
Q2 until the Blue Lights ash three times.
2. Make sure that both devices are now ashing slowly in Blue.
3. On the G4, select an available CHANNEL to pair the Q2 (CHANNEL
A” or CHANNEL “B”).
NOTE: Selecting a CHANNEL that is already in use will replace the paired
headset on that CHANNEL with the newly paired headset.
4. On the G4, press and hold the assigned CHANNEL BUTTON (“A” or
“B”) for at least six seconds until the G4’s BLUE or RED Light begins
ashing rapidly, indicating it is in Intercom Pairing mode. (See Table
in 9.10).
5. On the Q2, simultaneously press and hold the CTRL and MC
Buttons until the RED Light begins ashing rapidly, indicating it is in
Intercom Pairing mode (see
Q2
manual).
6. Within a few seconds, both units will show a solid light for two
seconds, indicating that they are now paired, connected and ready
for use.
NOTES:
• If the Pairing process is not completed within two minutes the units will
return to Standby mode.
• Voice Connect Intercom can only be initiated from the G4/Q2 pro.
However, you can always initiate the Intercom manually also from a Q2
unit by pressing the button.
19
scala rider
®
G4
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala rider G4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala rider G4 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala rider G4

Cardo Scala rider G4 User Manual - German - 30 pages

Cardo Scala rider G4 User Manual - Dutch - 29 pages

Cardo Scala rider G4 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info