480782
18
Zoom out
Zoom in
Previous page
1/27
Next page
Initiate Intercom calls
There are two ways to start an Intercom call with your paired G4s while the
G4 is in Standby mode:
VOICE CONNECT:
Start talking loudly
Once you start talking loudly, an Intercom
call will be established with both paired G4s,
CHANNEL “A” and CHANNEL “B” (if both are
available).
CHANNEL BUTTON
CONNECT:
Single tap the CHANNEL
Aor “B” Button to add or
remove the desired channel
from an Intercom call.
9.10c. FOUR-WAY INTERCOM
When connected to three other G4 units, your G4 can also
participate in a 4-way Conference Intercom Call (full duplex) as
explained below.
Please note that the 4-way conference operates in a linear manner,
whereby the two passengers serve as the connecting links for the
entire group. Therefore, if one of the Passengers disconnects, the
4-way conference mode will be interrupted until that passenger is
reconnected.
4-Way Intercom between up to two couples on two motorcycles
two drivers (1 and 3) and two passengers (2 and 4)
In this conguration the two passengers (numbered 2 and 4) are each
using two Bluetooth connections:
Passenger 2 is paired to Driver 1 and to Passenger 4
Passenger 4 is paired to Driver 3 and to Passenger 2
IMPORTANT: Since both Passengers each use two Bluetooth connections
during the conference mode, they will both be disconnected from their
mobile phones until the conference mode is terminated. Upon termination,
both Passengers will automatically re-connect to their mobile phones. Both
Drivers 1 and 3 remain connected to their mobile phones or GPS devices
during the 4-way intercom call.
PAIRING FOUR SCALA RIDER G4s
To converse in the 4-Way intercom conference mode, the four G4s
must be paired as shown in the biker illustration above. All four units
should initially be turned o.
Step One: Pair Driver 1 to Passenger 2 via Channel “A” as follows
a. Turn both G4s ON by pressing and holding the Mobile Buttons
until the Blue Light ashes three times.
b. Both G4s should now be ashing slowly in Blue.
c. Press and hold CHANNEL (“A) BUTTON on both G4s for at least
six seconds until the G4’s BLUE or RED Light begins ashing
rapidly, indicating that they have entered the Intercom Pairing
mode. (See Table in section 9.10)
d. Release the buttons and wait until both G4s display a solid light
for two seconds, indicating that the two G4s are now paired for
Intercom connection. (This may take up to two minutes).
Step Two: Pair Driver 3 to Passenger 4 via Channel “A
Repeat the above pairing procedure between Driver 3 and Passenger 4.
Step Three: Pair Passenger 2 to Passenger 4 via Channel “B
Repeat the above pairing procedure between Passenger 2 and
Passenger 4 using the Channel “B” button. (instead of Channel “A
button as described in point “c” of Step One above).
18
scala rider
®
G4
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala rider G4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala rider G4 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala rider G4

Cardo Scala rider G4 User Manual - German - 30 pages

Cardo Scala rider G4 User Manual - Dutch - 29 pages

Cardo Scala rider G4 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info