480782
16
Zoom out
Zoom in
Previous page
1/27
Next page
9.6 VOICE CONNECT FEATURE VOX
The G4 oers VOX technology for safe and hands-free operation of
some key functions.
For incoming calls, just pronounce loudly any word (e.g. “hello”).
To reject an incoming call, remain silent for about 15 seconds.
To reject an Intercom call remain silent for 30 seconds.
NOTE: The Enable/Disable Voice Connect feature aects only the Intercom
functionality.
ENABLE/DISABLE VOX can be done via the PC software and directly
on your G4 via the Settings Customization Voice Menu (see section 4.2).
9.7 RESET PAIRING RESTORING THE ORIGINAL DEFAULT
CONFIGURATION
This section is only relevant once you have completed a pairing process
You can delete all of your paired devices at any time as follows:
1. With the G4 turned ON, press and hold the Mobile Button for
at least six seconds until the Red and Blue Lights begin rapidly
alternating.
2. Press and hold the Volume Up Button for three seconds.
3. The Red and Blue Lights will flash five times simultaneously and
then the G4 will turn off, confirming that Reset was successfully
completed.
9.8 NOTEWORTHY ISSUES
a. Connecting the G4 to other units
To pair your G4 to other scala rider models, please refer to section
9.10 c below.
b. Busy Status (When using a G4)
When attempting an Intercom call with a device that is already on
a Phone/GPS/Intercom call, you will hear two beeps indicating the
other device is busy.
c. Automatic Reconnection of the Intercom
If the G4 and another paired unit go out of range and disconnect
from each other, the G4 will immediately try to reconnect to the
other unit.
You can manually reconnect the intercom call while the G4 is in
Standby mode by pressing the CHANNEL “A” or the CHANNEL “B”
Button to connect to the respective lost connection.
d. Conference Mode Limitations
Whenever you enter the Intercom Conference mode among three
or even four participants (including yourself), the participants
who maintain simultaneously two active connections will not be
able to receive mobile phone calls or GPS messages as long as the
conference call is in progress (see details in sections 9.10 b and 9.10 c)
9.9 TROUBLESHOOTING THE INTERCOM
First, make sure your microphone is located properly in front of the
center of your mouth.
The G4 is designed for use in loud environments. Therefore, you
should test the Intercom functionality only in a noisy environment,
such as next to an idling motorcycle and not indoors. Please also
verify that the G4s were paired together properly by following the
instructions in the relevant Setup sections.
9.10 USING THE G4 FOR INTERCOM WITH OTHER G4 UNITS
PAIRING LED INDICATION FOR INTERCOM CHANNELS
INTERCOM
CHANNEL
PAIRING / CONNECTION
BUTTON
PAIRING MODE LED
INDICATORS
CHANNEL “A CHANNEL “A” BUTTON Rapid RED ashing
CHANNEL “B” CHANNEL “B” BUTTON Rapid BLUE ashing
16
scala rider
®
G4
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala rider G4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala rider G4 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala rider G4

Cardo Scala rider G4 User Manual - German - 30 pages

Cardo Scala rider G4 User Manual - Dutch - 29 pages

Cardo Scala rider G4 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info