Manual Brother Innov-is M280D (page 89 of 100) (English)

718769

89

Zoom out

Zoom in

Previous page

1/100

Next page

Troubleshooting

87

APPENDIX

5

■ After sewing

Skipped stitches

Machine is threaded incorrectly. 13, 17

Using improper needle or thread for the selected

fabric.

21

Needle is turned, bent or the point is dull. 22

Needle is installed incorrectly. 22

Dust or lint has collected under the needle plate. 79

Thin or stretch fabrics are being sewn.

• Attach stabilizer material to the fabric.

32

Not stitching

Needle is turned, bent or the point is dull. 22

Bobbin is set incorrectly. 16

Upper threading is incorrect. 17

High-pitched sound while sewing

Dust or lint is caught in the feed dogs. 79

Pieces of thread are caught in the race. 79

Upper threading is incorrect. 17

A bobbin designed specifically for this machine is

not used.

13

There are needle holes or friction scratches in the

bobbin case.

*

Fabric does not feed through the machine.

Feed dogs are set in the down position.

• Slide the feed dog position switch to the right

().

5

Stitches are too close together. 29

Wrong presser foot was used. 23

Needle is turned, bent or the point is dull. 22

Thread is entangled. 82

Zigzag foot “J” is slanted on a thick seam at the

beginning of stitching.

32

The fabric feeds in the opposite direction.

The feed mechanism is damaged. *

The needle contacts the needle plate.

The needle clamp screw is loose. 22

Needle is turned, bent or the point is dull. 22

Symptom, Cause/solution

Reference

Fabric being sewn with the machine cannot be

removed.

Thread is tangled below the needle plate. 82

A broken needle has fallen into the machine.

• Turn off the machine, and remove the needle

plate. If the needle that fell into the machine

can be seen, use tweezers to remove it. After

removing the needle, return the needle plate to

its original position and insert a new needle.

Before turning on the machine, slowly turn the

handwheel toward you to check that it turns

smoothly and that the new needle enters

through the center of the needle plate opening.

If the handwheel does not turn smoothly or the

needle that fell into the machine cannot be

removed, consult your authorized Brother

dealer or the nearest Brother authorized

service center.

82

The handwheel does not turn smoothly.

Thread is tangled in the bobbin case. 79, 81,

82

Symptom, Cause/solution

Reference

Thread tension is incorrect.

Upper threading is incorrect. 17, 81

Bobbin is set incorrectly. 16, 81

Using improper needle or thread for the selected

fabric.

21

Presser foot holder is not attached correctly. 23

Thread tension is set incorrectly. 29, 81

Bobbin thread is incorrectly wound. 16

Needle is turned, bent or the point is dull. 22

A bobbin designed specifically for this machine is

not used.

13

Character or decorative stitch patterns are

misaligned.

Wrong presser foot was used. 35

Stitch pattern adjustment settings were set

incorrectly.

55

Stitch pattern is irregular.

Wrong presser foot was used. 23

Thin or stretch fabrics are being sewn.

• Attach stabilizer material to the fabric.

32

Symptom, Cause/solution

Reference

1

bonjour
je dois faire des coutures au point droit à 5mm du bord. comment faire le réglage. Merci Submitted on 15-11-2022 at 10:03
Reply Report abuse
bonjour
je souhaite faire des coutures à 0.5 cm avec ma brother 280. Comment faire
Merci bonne journée Submitted on 3-9-2022 at 10:38
Reply Report abuse
message sur brother 280 lorsque la commande de vitesse est réglée pour contrôler la largeur du point zigzag, la touche marche/arrêt ne fonctionne pas. Comment faire pour annuler cette commande Merci de m'aider Submitted on 27-5-2022 at 07:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Brother Innov-is M280D at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M280D in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M280D

Brother Innov-is M280D User Manual - German - 100 pages

Brother Innov-is M280D User Manual - Dutch - 100 pages

Brother Innov-is M280D User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info