Manual Brother Innov-is M280D (page 90 of 100) (English)

718769

Zoom out

Zoom in

1/100

Troubleshooting

Thread tension is set incorrectly. 29, 81

Fabric was pulled, pushed or fed at an angle

while it was being sewn.

• Sew while guiding the fabric with your hands

so that the fabric is fed in a straight line.

The thread is tangled, for example, in the bobbin

case.

Embroidery pattern does not embroider correctly.

Thread is twisted. 82

Thread tension is set incorrectly. 29

Fabric was not inserted into the frame correctly

(fabric was loose, etc.).

Stabilizing material was not attached.

• Always use stabilizing material, especially with

stretch fabrics, lightweight fabrics, fabrics with

a coarse weave, or fabrics that often cause

pattern shrinkage. See your authorized Brother

dealer for the proper stabilizer.

There was an object placed near the machine,

and the carriage or embroidery frame hit the

object during embroidering.

Material coming out of the embroidery frame is

causing problems.

• Stretch the fabric on the frame once again so

that the material coming out of the embroidery

frame does not cause problems, rotate the

pattern and embroider.

A heavy fabric is being embroidered, and the

fabric is hanging off the table.

• If embroidery is done with the fabric hanging

off the table, the embroidery unit movement

will be impaired. Support the fabric while

embroidering.

Fabric is snagged or caught on something.

• Stop the machine and place the fabric so that it

does not get caught or snagged.

–

The carriage was moved while the embroidery

frame was being removed or attached during

embroidery.

• If the carriage is moved during the process, the

pattern may be misaligned. Be careful when

removing or attaching the embroidery frame.

Stabilizer is incorrectly attached, for example, it is

smaller than the embroidery frame.

Loops appear on the surface of the fabric when

embroidering.

The thread tension is incorrectly set. 70

Embroidery bobbin thread intended for use with

this machine is not being used.

Symptom, Cause/solution

Reference

bonjour
je dois faire des coutures au point droit à 5mm du bord. comment faire le réglage. Merci Submitted on 15-11-2022 at 10:03
Reply Report abuse
bonjour
je souhaite faire des coutures à 0.5 cm avec ma brother 280. Comment faire
Merci bonne journée Submitted on 3-9-2022 at 10:38
Reply Report abuse
message sur brother 280 lorsque la commande de vitesse est réglée pour contrôler la largeur du point zigzag, la touche marche/arrêt ne fonctionne pas. Comment faire pour annuler cette commande Merci de m'aider Submitted on 27-5-2022 at 07:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M280D in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M280D

Brother Innov-is M280D User Manual - German - 100 pages

Brother Innov-is M280D User Manual - Dutch - 100 pages

Brother Innov-is M280D User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother Innov-is M280D Manual

Product: