Manual Brother Innov-is M280D (page 88 of 100) (English)

718769

88

Zoom out

Zoom in

Troubleshooting

86

There are scratches around the opening in the

needle plate.

* There is a notch on the left side of the opening

in the needle plate. This is not a scratch.

*

There are scratches around the opening in the

presser foot.

*

There are scratches on the bobbin case. *

A bobbin designed specifically for this machine is

not used.

13

Upper threading is incorrect. 17

Bobbin is set incorrectly. 16

Presser foot is attached incorrectly. 23

Screw of the presser foot holder is loose. 24

Fabric is too thick. 21, 32

Fabric is fed forcefully when sewing thick fabric

or thick seams.

32

Stitch length is too short. 29

Stabilizer is not attached to fabric being

embroidered.

62

Bobbin thread is incorrectly wound. 13

Upper thread breaks.

Machine is not threaded correctly (used the

wrong spool cap, spool cap is loose, the thread

did not catch the needle bar threader, etc.).

17

Knotted or tangled thread is being used. –

The selected needle is not appropriate for the

thread being used.

21

Upper thread tension is too tight. 29

Thread is tangled. 81

Needle is turned, bent or the point is dull. 22

Needle is installed incorrectly. 22

There are scratches around the opening of the

needle plate.

* There is a notch on the left side of the opening

in the needle plate. This is not a scratch.

*

Symptom, Cause/solution

Reference

1 Notch

a

1 Notch

a

There are scratches around the opening in the

presser foot.

*

There are scratches on the bobbin case. *

Using improper needle or thread for the selected

fabric.

21

A bobbin designed specifically for this machine is

not used.

13

The thread is tangled on the wrong side of the fabric.

Upper threading is incorrect. 17, 81

Using improper needle or thread for the selected

fabric.

21

The upper thread is too tight.

The bobbin thread is incorrectly installed. 16, 81

Bobbin thread breaks.

Bobbin is set incorrectly. 16

Bobbin thread is incorrectly wound. 13

A scratched bobbin is being used. 16

Thread is tangled. 82

A bobbin designed specifically for this machine is

not used.

13

Fabric puckers.

There is a mistake in the upper or bobbin

threading.

13, 17

Spool of thread is set incorrectly. 13

Using improper needle or thread for the selected

fabric.

21

Needle is turned, bent or the point is dull. 22

Stitches are too long when sewing thin fabrics. 29

Thread tension is set incorrectly. 29, 81

Wrong presser foot was used. 23

The stitch is not sewn correctly.

The presser foot that is used is not appropriate

for the type of stitch that you wish to sew.

23

The thread tension is incorrect.

29, 81

The thread is tangled, for example, in the bobbin

case.

82

Feed dogs are set in the down position.

• Slide the feed dog position switch to the right

().

5, 48

Symptom, Cause/solution

Reference

1

bonjour
je dois faire des coutures au point droit à 5mm du bord. comment faire le réglage. Merci Submitted on 15-11-2022 at 10:03
Reply Report abuse
bonjour
je souhaite faire des coutures à 0.5 cm avec ma brother 280. Comment faire
Merci bonne journée Submitted on 3-9-2022 at 10:38
Reply Report abuse
message sur brother 280 lorsque la commande de vitesse est réglée pour contrôler la largeur du point zigzag, la touche marche/arrêt ne fonctionne pas. Comment faire pour annuler cette commande Merci de m'aider Submitted on 27-5-2022 at 07:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Brother Innov-is M280D at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M280D in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M280D

Brother Innov-is M280D User Manual - German - 100 pages

Brother Innov-is M280D User Manual - Dutch - 100 pages

Brother Innov-is M280D User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother Innov-is M280D Manual

Product: