697457
145
Zoom out
Zoom in
Previous page
1/158
Next page
4. When the fault is reset, send the restored report to the configured destinations. The
FAULT indicator is turned off when there is no other system fault.
Bosch Option Bus Power Failure
Condition:
Bosch option bus power supply Voltage is lower than 9V+-5%.
Restore:
Voltage is raised to 12V and fault is reset.
Supervise:
1. Monitor the voltage by MPU.
2. Report the Bosch Option Bus Power Supply fault to the configured destination
programmed on address 124.
3. Slow flash FAULT indicator (refer to Keypad Indicators for the detailed description).
4. When the fault is reset, send the restored report to the configured destinations. The
FAULT indicator is turned off when there is no other system fault.
RF Repeater AC Power Failure
Condition:
There is an AC power failure to the repeater, or the repeater is not wired correctly, if wireless
module is enabled.
Restore:
The repeater AC power restored and fault is reset.
Supervise:
1. Report the repeater AC power fault to configured destination when the fault is detected.
2. Slow flash FAULT indicator (refer to Keypad Indicators for the detailed description).
3. When the fault is reset, send the restored report to the configured destinations. The
FAULT indicator is turned off when there is no other system fault.
RF Repeater Battery Failure
Condition:
The repeater has experienced a low battery condition, if wireless module is enabled.
Restore:
The battery restored and fault is reset.
Supervise:
1. Report the repeater battery fault to configured destination when the fault is detected.
2. Slow flash FAULT indicator (refer to Keypad Indicators for the detailed description).
3. When the fault is reset, send the restored report to the configured destinations. The
FAULT indicator is turned off when there is no other system fault.
RF Sensor Power Failure
Condition:
The sensor has experienced a low battery condition, if wireless module is enabled.
Restore:
The sensor battery restored and fault is reset.
Supervise:
1. Report the sensor power fault to configured destination when the fault is detected.
2. Slow flash FAULT indicator (refer to Keypad Indicators for the detailed description).
3. When the fault is reset, send the restored report to the configured destinations. The
FAULT indicator is turned off when there is no other system fault.
AMAX 2100 / 3000 / 4000
Troubleshooting | en 145
Bosch Sicherheitsysteme GmbH Installation Guide 2013.10 | 01 | F.01U.267.112
145


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX 4000 in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX 4000

Bosch AMAX 4000 User Manual - English - 24 pages

Bosch AMAX 4000 User Manual - English - 36 pages

Bosch AMAX 4000 Quick start guide - English - 38 pages

Bosch AMAX 4000 Installation Guide - German - 170 pages

Bosch AMAX 4000 Quick start guide - German - 34 pages

Bosch AMAX 4000 Installation Guide - Dutch - 166 pages

Bosch AMAX 4000 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info