697457
144
Zoom out
Zoom in
Previous page
1/158
Next page
All keyfob configuration are correct and fault is reset.
Supervise:
1. Slow flash FAULT indicator (refer to Keypad Indicators for the detailed description).
2. When the fault is reset, the FAULT indicator is turned off when there is no other system
fault.
2 - Power Failure
The zone indicator 2 lights to indicate power faults. Enter [2] to step to power faults list for
more information.
Panel AC Failure
Condition:
1. AC supply deficiency to panel caused by transformer.
2. Power supply fuse broken (230V).
3. Power supply disconnected (230V).
Restore:
1. AC MAINS supply is reconnected and fault is reset.
2. Monitor the voltage by MPU.
3. f the AC fault is not restored in 1 hour after the fault occurred, report the fault to
configured destination on address 124.
4. Slow flash FAULT indicator (refer to Keypad Indicators for the detailed description).
5. As the AC supply is reconnected, the MAINS indicator is back to light (except in
Programming Mode or Code Functions Mode).
6. When the fault is reset, send the restored report to the configured destinations.
Battery Low Battery
Condition:
1. Battery voltage is lower than 11V+-1%.
2. No battery connected.
Restore:
When Battery voltage rises to 12V+-1%, Dynamic Battery test is performed (time set in
Programming address 204), and fault is reset.
Supervise:
1. The system performs a Dynamic Battery Test every time (set in address 204) and every
time the system is armed or reset.
2. Report the low battery to the configured destination programmed on address 124.
3. Slow flash FAULT indicator (refer the detailed description in chapter keypad indicators).
4. When the fault is reset, send the restored report to the configured destinations. The
FAULT indicator is turned off when there is no other system fault.
Panel Aux Power Failure
Condition:
Aux Power Supply Voltage is lower than 9V.
Restore:
Voltage is raised to 12 and fault is reset.
Supervise:
1. Monitor the voltage by MPU.
2. Report the AUX power fault to the configured destination programmed on address 124.
3. Slow flash FAULT indicator (refer to Keypad Indicators for the detailed description).
144
en | Troubleshooting AMAX 2100 / 3000 / 4000
2013.10 | 01 | F.01U.267.112 Installation Guide Bosch Sicherheitsysteme GmbH
144


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX 4000 in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX 4000

Bosch AMAX 4000 User Manual - English - 24 pages

Bosch AMAX 4000 User Manual - English - 36 pages

Bosch AMAX 4000 Quick start guide - English - 38 pages

Bosch AMAX 4000 Installation Guide - German - 170 pages

Bosch AMAX 4000 Quick start guide - German - 34 pages

Bosch AMAX 4000 Installation Guide - Dutch - 166 pages

Bosch AMAX 4000 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info