697457
142
Zoom out
Zoom in
Previous page
1/158
Next page
3. When the fault is reset, send the restored report to the configured destinations. The
FAULT indicator is turned off, when there is no other system fault.
RF Receiver Failure
RF Receiver 1 Fault
Condition:
The receiver is abnormal (e.g., RF micro is removed / hold RF micro in reset / ...) if wireless
module is enabled.
Restore:
Communication with receiver is normal, wireless module is enabled, and fault is reset.
Supervise:
1. Report the receiver fault to configured destination when the fault is detected.
2. Slow flash FAULT indicator (refer to Keypad Indicators for the detailed description).
3. When the fault is reset, send the restored report to the configured destinations. The
FAULT indicator is turned off, when there is no other system fault.
RF Receiver 1 Missing
Condition:
1. No communication with receiver if wireless module is enable.
2. Any RF zone, or repeater, or keyfob is configured, but the wireless module is disable.
Restore:
Communication with receiver is normal, wireless module is enable, and fault is reset.
Supervise:
1. Report the receiver missing fault to configured destination when the fault is detected.
2. Slow flash FAULT indicator (refer to Keypad Indicators for the detailed description).
3. When the fault is reset, send the restored report to the configured destinations. The
FAULT indicator is turned off when there is no other system fault.
RF Receiver 1 Jammed
Condition:
Much disturb signal around the receiver, if wireless module is enable.
Restore:
No much disturb signal around the receiver, wireless module is enable, and fault is reset.
Supervise:
1. Report the receiver jam fault to configured destination when the fault is detected.
2. Slow flash FAULT indicator (refer to Keypad Indicators for the detailed description).
3. When the fault is reset, send the restored report to the configured destinations. The
FAULT indicator is turned off when there is no other system fault.
RF Sensor Failure
RF Sensor Missing
Condition:
If any one wireless zone have no status report to receiver in the RF supervision interval and
wireless module is enable.
Restore:
All wireless zones have status report to receiver in the RF supervision interval and wireless
module is enabled and fault is reset.
Supervise:
1. Report the wireless zone missing fault to configured destination when the fault is
detected.
2. Slow flash FAULT indicator (refer to Keypad Indicators for the detailed description).
142
en | Troubleshooting AMAX 2100 / 3000 / 4000
2013.10 | 01 | F.01U.267.112 Installation Guide Bosch Sicherheitsysteme GmbH
142


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX 4000 in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX 4000

Bosch AMAX 4000 User Manual - English - 24 pages

Bosch AMAX 4000 User Manual - English - 36 pages

Bosch AMAX 4000 Quick start guide - English - 38 pages

Bosch AMAX 4000 Installation Guide - German - 170 pages

Bosch AMAX 4000 Quick start guide - German - 34 pages

Bosch AMAX 4000 Installation Guide - Dutch - 166 pages

Bosch AMAX 4000 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info