Manual Berner C500 (page 27 of 144) (English, German, Dutch, French, Italian, Spanish)

680440

Zoom out

Zoom in

1/144

Check for smooth running

If necessary, see the separate ﬁtting

instructions for the emergency battery

Standard sliding gate operator

Reinforced sliding gate operator

Power failure

Restore power

Audible engagement

DIL switch factory setting

1.5 Abbreviations used

Colour code for cables, single conductors and

components

The abbreviations of the colours for identifying the cables,

conductors and components comply with the international

colour code according to IEC757:

BN Brown

GN Green

WH White

YE Yellow

1.6 Information on the illustrated section

The illustrated section shows the operator ﬁtting of an

operator without a base plate to the inside right of the closed

sliding gate. Where ﬁtting or programming differs for an

operator with base plate or for a sliding gate with the operator

attached to the inside left of the closed sliding gate, this is

shown in addition.

All dimensions in the illustrated section are in [mm].

2 Safety Instructions

ATTENTION:

IMPORTANT SAFETY INSTRUCTIONS.

FOR THE SAFETY OF PERSONS, IT IS IMPORTANT TO

COMPLY WITH THE FOLLOWING INSTRUCTIONS. THESE

INSTRUCTIONS MUST BE KEPT.

2.1 Intended use

Depending on the type of operator, the operator can be used

in private / non-commercial areas or in commercial areas.

The sliding door operator is exclusively intended for the

operation of smooth-running sliding doors. The maximum

permissible door size and maximum weight must not be

exceeded. The door must be easy to open and close

manually.

Note the manufacturer's speciﬁcations regarding the gate and

operator combination. Potential hazards as outlined in

DINEN13241-1 are avoided by construction and ﬁtting

according to our guidelines. Gate systems that are located in

a public area and only have one protective device, such as a

force limit, may only be operated under supervision.

2.2 Inappropriate use

Continuous operation and use on gates with a gradient or

slope is not permitted.

2.3 Fitter qualiﬁcation

Only correct ﬁtting and maintenance in compliance with the

instructions by a competent / specialist company or a

competent / qualiﬁed person ensures safe and ﬂawless

operation of the system. According to EN12635, a specialist

is a person with suitable training, specialist knowledge and

practical experience sufﬁcient to correctly and safely ﬁt, test,

and maintain a gate system.

2.4 Safety instructions for ﬁtting, maintenance,

repairs and disassembly of the gate system

WARNING

Danger of injury due to a malfunction in the gate system

▶

See warning in section3.1

WARNING

Danger of injury due to unexpected gate travel

▶

See warning in section9

Fitting, maintenance, repairs, and disassembly of the gate

system and sliding gate operator must be performed by a

specialist.

▶

In the event of a gate system or gate operator failure

(sluggish operation or other malfunctions), a specialist

must be commissioned immediately for the

inspection / repair work.

C300 - C800 / Rev. 1.1 RE / 07.2014 27

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Berner C500 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 12,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Berner C500 Manual

Product: