680440

Berner C500 Manual

25
Zoom out
Zoom in
Previous page
1/144
Next page
Table of Contents
A Articles supplied ..................................................... 3
B Tools needed for fitting the
sliding gate operator .............................................. 4
C
1
Fitting accessories for the plastic
toothed tracks ......................................................... 5
C
2
Plastic toothed track with steel core
(fitting bracket at bottom) ...................................... 5
C
3
Plastic toothed track with steel core
(fitting bracket at top) ............................................. 5
C
4
Galvanized steel toothed track .............................. 5
Drill stencil ........................................................... 141
1 About These Instructions ..................................... 26
1.1 Further applicable documents ................................ 26
1.2 Warnings used ........................................................ 26
1.3 Definitions used ...................................................... 26
1.4 Symbols used ......................................................... 26
1.5 Abbreviations used ................................................. 27
1.6 Information on the illustrated section ..................... 27
2
Safety Instructions ....................................... 27
2.1 Intended use ........................................................... 27
2.2 Inappropriate use .................................................... 27
2.3 Fitter qualification ................................................... 27
2.4 Safety instructions for fitting, maintenance,
repairs and disassembly of the gate system .......... 27
2.5 Safety instructions for fitting ................................... 28
2.6 Safety instructions for initial
start-up and for operation ....................................... 28
2.7 Safety instructions for using
the hand transmitter................................................ 28
2.8 Approved safety equipment.................................... 28
3 Fitting ..................................................................... 28
3.1 Inspecting and preparing the gate / gate system .... 28
3.2 Fitting the sliding gate operator .............................. 29
3.3 Fitting the toothed track ......................................... 29
3.4 Sliding gate operator electrical connection ............ 30
3.5 Fitting the circuit board bracket .............................. 30
3.6 Fitting the magnet holder ........................................ 30
3.7 Locking the operators ............................................. 30
3.8 Connecting additional components / accessories .. 30
4 Initial operation ..................................................... 31
4.1 Preparation ............................................................. 32
4.2 Teaching in the gate's end-of-travel positions ........ 32
4.3 Learning the forces ................................................. 32
4.4 Changing the starting point
for slow speed when opening and closing ............. 33
4.5 Reversal limit........................................................... 34
4.6 Automatic timed closing ......................................... 34
5 DIL Switch Functions............................................ 34
5.1 DIL switch1 ............................................................ 34
5.2 DIL switch2 ............................................................ 34
5.3 DIL switch3 / DIL switch4 ...................................... 34
5.4 DIL switch5 / DIL switch6 ...................................... 35
5.5 DIL switch7 ............................................................ 35
5.6 DIL switch8 / DIL switch9 ...................................... 35
5.7 DIL switch10 .......................................................... 35
5.8 DIL switch11 .......................................................... 35
5.9 DIL switch12 .......................................................... 35
5.10 DIL switch13 .......................................................... 35
5.11 DIL switch14 .......................................................... 36
5.12 DIL switch15 .......................................................... 36
5.13 DIL switch16 .......................................................... 36
6 Radio ...................................................................... 36
6.1 Hand transmitter BDS140 ....................................... 36
6.2 Radio Remote Control ............................................ 37
6.3 Programming the hand transmitter
buttons on an external radio receiver ..................... 37
6.4 Operation ................................................................ 37
6.5 Deleting all data of an external radio receiver ........ 37
7 Final Work .............................................................. 37
7.1 Fixing the warning sign ........................................... 37
8 Operation ............................................................... 37
8.1 Instructing users ..................................................... 37
8.2 Function check ....................................................... 37
8.3 Normal operation .................................................... 38
8.4 Behaviour during a power failure ............................ 38
8.5 Behaviour following a power failure ........................ 38
9 Inspection and Maintenance ............................... 38
10 Displays for Operating Conditions,
Errors and Warnings ............................................. 38
10.1 LED GN ................................................................... 38
10.2 LED RT .................................................................... 38
10.3 Display of error and warning messages ................. 38
10.4 Error acknowledgement .......................................... 39
11 Resetting the Control / Restoring
Factory Settings .................................................... 39
12 Dismantling and Disposal .................................... 39
13 Optional Accessories ........................................... 39
14 Warranty Conditions ............................................. 40
15 Excerpt from the Declaration
of Incorporation .................................................... 40
16 Technical Data ....................................................... 41
17 Overview of DIL Switch Functions ...................... 42
Dissemination as well as duplication of this document and the
use and communication of its content are prohibited unless
explicitly permitted. Noncompliance will result in damage
compensation obligations. All rights reserved in the event of
patent, utility model or design model registration. Subject to
changes.
Illustrated section ..................................... 123
C300 - C800 / Rev. 1.1 RE / 07.2014 25
ENGLISH
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berner C500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berner C500 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 12,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info