810510

ATTACK DPX Combi Pellet Manual

56
Zoom out
Zoom in
Previous page
1/100
Next page
55
EN
Language selection:
There is an option to select the following languages: Slovak, Eng-
lish, German, Italian, French, Czech.
Setting of the output range:
The burner can operate in the output range of 8 – 12 kW, or
14 – 30 kW, according to the range selected by this parameter.
Adjustment of the pellet dosing:
The most important parameter of the control system! Here
you can set the pellet ration supplied by the feeder at the full
operation. To set the pellet ration, you need a plastic sack and a
very exact weighing machine. After entering into the parameter, you have to set the Heat value
(kWH/kg) as the first. Then, the text „Put on the sack“ is displayed (pellet feeder should be filled
with pellets up to the bore). Put the sack on the feeder and press the „S“ button.
Check countdown on display now, while the feeder works for 6 minutes. Then, enter the weight
of the pellets fallen by pressing „+“ and „−“ buttons and confirm/save by „S“ button.
Ventilator setting:
By this parameter it is possible to adjust the flue gas adequately
to the flue gas analyzer for the content of CO and O2 in flue gas.
Operation time of the feeder:
Here you can see, how long did the pellet feeder work. You can
use it to calculate the energy consumption, etc.
Test:
To be used by troubleshooting. Here you can manually or auto-
matically control the components.
This function is very helpful by troubleshooting with particular
components. In the manual mode you can test every component individually, by pressing „S“ for
start and „ESC“ for stop. For step forwards to the required part, press „+/−“. They are displayed in
the following order:
Ventilator (during the test of ventilator, the displayed rotations per minute should stabilize at 2 000);
Pellet feeder (start/stop by the buttons „S“/„ESC“);
Ignition coil (activated by „S“ and stopped by „ESC“);
Grate (moves out by „S“ and moves back by „ESC“. Here you can see, how many mA are con-
sumed by unit during the shift, which should not exceed 1 800 mA – limit to start the error
“Grate blockage”).
Other displayed options: Current temperature, if the thermal probe is connected; current photo-
cell value; shows light (On/Off); closing of this application.
LANGUAGE
ENTER < > EXIT
EFFECT SPAN
ENTER < > EXIT
FEEDER ADJUST.
ENTER < > EXIT
VENTILATOR.
ENTER < > EXIT
OPERATION TIME OF
FEEDER.
ENTER < > EXIT
MENU/TEST
ENTER < > EXIT
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK DPX Combi Pellet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK DPX Combi Pellet in the language / languages: English as an attachment in your email.

The manual is 8.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info