810510

ATTACK DPX Combi Pellet Manual

55
Zoom out
Zoom in
Previous page
1/100
Next page
54
EN
Time setting of the cleaning by blow–through:
The cleaning by blow–through is activated, when the thermostat
switches off and the value recorded by the photocell decreases
under 12 %.
Setting of the maximum burning time:
By this parameter it is possible to set the maximum time of the
continuous burner operation.
Setting of the minimum duration of the break between the burn–down and the ignition:
This parameter ensures, that it comes to the next burner ignition
only after the stated time, not immediately after the burn–down.
Setting of the time of the blow–through clening:
By the stated value of ¨T, before achieving the required boiler
temperature, the boiler output decreases automatically to the
pre–set level.
Setting of the photocell sensibility:
Here you can set the photocell sensibility, i.e. the value of light in
(%), to which should the system react as to the fire. It should not
be necessary to set the light sensibility, if the correct photocell is
installed. The setting from production is: 50%.
Selection of the thermostat:
Here you select the required thermostat: the external boiler
thermostat or the burner thermal probe, or combination with the
room thermostat.
If you use the burner thermal probe, it is possible to set 2 parameters. Firstly, select the starting
temperature, save the value by pressing the „S“ button, then you can change the stop tempera-
ture. By repeated pressing of „S“ you save this value as well. The burner will now work in the
range of the actually set temperature values. There should be difference between the starting
and the stop temperature of at least 5 °C.
Grate cleaning:
By this parameter you can set, if the grate cleaning will be acti-
vated and when it has to be turned on – before the ignition or
after the burn–down.
Pump control:
By this parameter you can set if the pump will be controlled and
if yes, then how long the delay will be.
Pump safety tem–perature:
By overloading this temperature there will be turned on
pump.
CLEANBLOW TIME
ENTER < > EXIT
COMBUST. TIME
ENTER < > EXIT
MIN. PAUSE TIME
ENTER < > EXIT
MODULATION.
ENTER < > EXIT
PHOTOSENSOR
ENTER < > EXIT
THERMOSTAT
ENTER < > EXIT
SCRAPER
ENTER < > EXIT
Pump Control
ENTER < > EXIT
Pump safety temperature
ENTER < > EXIT
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK DPX Combi Pellet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK DPX Combi Pellet in the language / languages: English as an attachment in your email.

The manual is 8.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info