Manual Aritech DO505 (page 15 of 44) (English, German, Dutch, French, Italian, Spanish)

702725

Zoom out

Zoom in

1/44

-14-

alignment

oscilloscope

2 V DC / 100us

GND

test point for

alignment control unit

resp. oscilloscope

SIG

4 3 2 1

Alarm

connecting clamp

radio controled module

Alignment using an oscilloscope

The alignment can also be checked by using an

oscilloscope, which must be connected to the

receiver at the test point (SIG) and minus

potential (GND).

The number of impulses on the oscilloscope

corresponds to the number of LED’s on the

alignment checking device.

PUTTING INTO OPERATION

Adjustments at the receiver

Disqualification

Switch OFF ON

S1.2 (Fig. 1.5) Alarm output at DQ No alarm at DQ

S1.1 (Fig. 1.5) DQ 5 sec. DQ 30 sec.

Alarm response sensitivity

Alarm response

sens.

S1.4 (Fig. 1.5) S1.3 (Fig. 1.5)

20 ms ON ON

50 ms OFF ON

150 ms ON OFF

300 ms OFF OFF

The alarm response sensitivity

is the period during which the

IR beam must be interrupted

before an alarm is activated.

running – 50 ms

walking – 150 ms

slow walking – 300 ms

Housing / GND connection

Coding bridge

Coding jumper Jumper removed

(Fig. 1.10)

Connecting clamp 2 - GND is

connected to the housing

Connecting clamp 2 - GND is

not connected to the housing

Functional test at the transmitter

A functional test at the transmitter can be carried out by shortening the test points (Fig. 1.1TX). The transmitter

is working correctly when the green LED (Fig. 1.2TX) lights up.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aritech DO505 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aritech DO505 Manual

Product: