702725

Aritech DO505 Manual

16
Zoom out
Zoom in
Previous page
1/44
Next page
- 15 -
CHECKING THE INSTALLATION
Checklist
1. Is the beam unobstructed between the transmitter and receiver?
2. Are the individual parabolic mirrors optimally aligned?
3. Have the screws of the mirror holders been sufficiently tightened?
4. Have all the cable clamps been sufficiently tightened?
5. Are heating elements installed for outdoor use?
6. Has the operating voltage of the transmitter and receiver been checked?
7. Has the operating voltage of the devices and pillar heaters (12, 24, or 48 V) been checked?
Operational test
1. Check the alignment by using the enclosed cardboard cut-outs ("Shadow paper“): when the whole of the cut-
out is positioned in the middle of the mirror, the receiving signal should still be maximum. If not, readjust the
beam.
2. Cover the upper mirror (Fig. 1.1) of the receiver ? no alarm should be activated.
3. Cover the lower mirror (Fig. 1.2) of the receiver ? no alarm should be activated.
4. Cover the upper and lower mirrors ? an alarm should be activated, the alarm LED on the receiver lights up.
Declaration of conformity
The Active Infrared Barrier, type Double Beam, whether as a stand alone or as a pillar-mounted integrated
device, consists of:
?? Single unit transmitter and receiver, or
?? Pillar mounted transmitter and receiver
These products are in conformity with the standards on electromagnetic compatibility EMV (89/336/EWG) in
accordance with directives of the Council for Adaptation Adjustment. They comply with the following electro-
magnetic compatibility standards:
1. EN50081-2
2. EN50082-2
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech DO505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech DO505 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info