541367

Allen-Heath GLD Digital Audio Mixing System Manual

15
Zoom out
Zoom in
Previous page
1/32
Next page
GLD User Guide 15 AP8561 iss.2
GLD-AR84 Expander AudioRack
AR84 plugged into the GLD-80 Mixer:
Inputs
33-40 Outputs 17-20
Input sockets 8 balanced XLR inputs for
microphone and line level sources. The preamps
are built into the AR84 rack and their Gain, Pad
and 48V phantom power is remote controlled
from the GLD console via the EXPANDER link.
The output of the analogue preamps are
converted to digital format and transported via a
Cat5 cable to be processed and mixed at the
GLD-80 mixer.
Any input can be patched to any channel using
the I/O or Preamp screens.
The sockets are not numbered. This is because
the number depends on where the AR84 is
plugged into the GLD system. Write-on blocks
are provided for you to label the sockets.
Output sockets 4 balanced XLR outputs
operating at nominal +4dBu line level. Any GLD
signal can be patched to any socket using the
console I/O screen. The default Template Shows
provide a logical mapping of these sockets to get
you started.
The sockets are not numbered. This is because
the number depends on where the AR84 is
plugged into the GLD system. Write-on blocks
are provided for you to label the sockets.
The socket identification is shown in the diagram
below:
EXPANDER port CAT5 cable link to
connect the AR84 expander to the EXPANDER
port on the AR2412 AudioRack or GLD-80 Mixer.
Note that the EXPANDER link is not
compatible with the iLive ACE connection.
Kensington security slot To attach a
‘Kensington lock’ standard anti-theft cable and
lock if required.
Fan A low noise fan inside the rack ensures
air movement to keep the circuits and internal
components within operating temperature range.
Ensure good ventilation at the back of the
rack. Read the safety instructions printed on the
panel and the Safety Sheet packed with the unit.
Mains cable clip You can secure the cable
in place using the plastic P-clip. Use a T20 Torx
screwdriver to refit the screw.
Mains power input IEC connector, fuse
and power ON/OFF push switch for the built-in
universal voltage power supply unit. This
accepts worldwide voltages from 100 to 240V AC
50/60Hz. Check that you have received the
correct mains lead for your territory.
Socket numbering
AR84 plugged into the AR2412 main AudioRack:
Inputs 25-32 Outputs 13-16
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GLD Digital Audio Mixing System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GLD Digital Audio Mixing System in the language / languages: English as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info