541367

Allen-Heath GLD Digital Audio Mixing System Manual

17
Zoom out
Zoom in
Previous page
1/32
Next page
GLD User Guide 17 AP8561 iss.2
GLD Remote iPad app and wireless router
GLD firmware Version 1.1 onwards supports the GLD Remote iPad app for wireless control of mixing and
processing using one or more iPads. This allows simultaneous control of different functions by more than
one engineer. For example, one engineer controlling the FOH mix at the GLD surface and another
controlling monitors on stage using an iPad.
Get the app Download the GLD Remote app from the Apple Store.
You can open it in Demo mode without a GLD connected to get a feel
for how it operates and to read the ? Help Manual within the app.
Choose a router (wireless access point) GLD Remote is a
professional mixing tool that justifies network equipment of suitably high
performance, quality and reliability.
For best performance we recommend you choose a dual band wireless
router with auto channel selection. Use the more recent 5GHz band in
places where there is intense WiFi activity or interference in the more
crowded 2.4GHz band. A wireless router with auto channel selection
automatically sets itself to an available or least congested channel when
you power it up.
Refer to the Allen & Heath web site for more information on choosing
wireless routers for use with the Allen & Heath iLive and GLD systems.
Set up the router You will need to connect it to a PC using a
wired LAN connection. Follow the instructions provided by the wireless
router manufacturer to access its setup menus.
Set the router IP address - This must be compatible with the GLD
console which has a default static IP address = 192.168.1.50 and
Subnet Mask = 255.255.255.0. Go to the Setup / Config / Network
screen to check the current GLD settings.
To work with the GLD you must give your wireless router a unique but
compatible IP address. Some routers may have a default address that
is not compatible and must be changed, for example 192.168.2.1. Some
may already be compatible, for example 192.168.1.254.
Set the router DHCP settings - Make sure the router is set for DHCP
so that it automatically allocates a compatible IP address to your iPad.
To avoid conflict with the GLD static address we recommend you set a
router DHCP address allocation range of 192.168.1.100 to 200.
Note You do not need to change the GLD setting to DHCP. The
console will work fine with a static IP address as long as it is not within
the router DHCP address range.
Set the router security -To prevent other people accessing your Wi-Fi
we recommend you enable WPA/WPA2 encryption during router setup.
A wireless key (password) will need to be set up.
Make a note of the router SSID. This is the name that the router
broadcasts to help identify it in the network list you will see in the iPad
Settings Wi-Fi page. If you want you can change the SSID to help you
identify it alongside other wireless networks in the area.
After setup, the wireless router can be connected to the Network socket
on the rear of the GLD console using a CAT 5 cable. Plug this into one
of the LAN (not Internet) ports on the rear of the router.
Position the router Make sure it is within the specified range and
in line of sight of the iPad where possible. It can help to place it high up
to avoid obstacles such as people and equipment. Avoid locating it
behind pillars or walls, near metal beams or on top of loudspeakers.
Good wireless range
Dual band (2.4 and 5GHz)
Auto channel select
Adjustable antennas
Good security
GLD (default)
Static IP = 192.168.1.50
Subnet Mask = 255.255.255.0
Router
Router IP = 192.168.1.254
Subnet Mask = 255.255.255.0
DHCP 192.168.1.100 to 200
Security = WPA
The router:
Recommended settings:
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GLD Digital Audio Mixing System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GLD Digital Audio Mixing System in the language / languages: English as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info