541367
16
Zoom out
Zoom in
Previous page
1/32
Next page
GLD User Guide 16 AP8561 iss.2
Connect and power up
Connect the AR2412 AudioRack Plug
a CAT5 cable into the dSNAKE port at the rack
and mixer. This is the main system link.
Connect the AR84 AudioRacks Plug a
CAT5 cable into the EXPANDER port of the
AR84 and the EXPANDER port of the AR2412 or
GLD-80 mixer.
Always plug the AR84 into an EXPANDER
port. Do not plug it into the dSNAKE port even if
you are not using an AR2412 main rack.
Plug in the mains power leads supplied
with the mixer and racks. Secure the leads by
hooking them into the plastic clips. If required the
leads can be locked into these clips. Use a T20
Torx (starhead) screwdriver to remove the fixing
screw.
To turn on the system Turn on power
using the rear panel On/Off switches.
The GLD-80 takes around 40 seconds to boot up.
Its screen lights white for a few seconds, then
turns black displaying its boot sequence. A while
later the Home screen is displayed. At this point
the yellow Lnk/Err indicators of connected
dSNAKE and EXPANDER ports start to flash
steadily showing that the link between the mixer
and racks is established. The mixer Audio Sync
LOCK indicator lights. Finally, the AudioRack
Ready indicators light and you will hear a click as
the output socket protection relays switch over.
If the firmware in a connected AudioRack is
not the same version as that in the GLD-80 then
the mixer will automatically update the rack
firmware during power up. This takes a few
seconds. During this time the Lnk/Err indicators
on the AudioRack flash at a fast rate. Once
updated normal flash rate is restored.
To turn off the system The system must
be powered down correctly. Return to the Home
screen. To do this turn off any active Sel key
whilst in the Processing view.
Touch the Power Down button. A popup
appears. Confirm the action then turn the mixer
and racks off using their power switches.
If the system is not powered down correctly
there is a possibility recent changes may be lost.
If the system was not powered down as
described above then aNot shut down
correctly’ screen appears the next time the
system is turned on.
Lnk/Err flashes
steadily
LOCK lights
Fast flash on firmware auto update
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GLD Digital Audio Mixing System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GLD Digital Audio Mixing System in the language / languages: English as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info