541367
13
Zoom out
Zoom in
Previous page
1/32
Next page
GLD User Guide 13 AP8561 iss.2
GLD-80 Mixer rear connectors
Network
Ethernet port for
wireless route
r
.
Cooling fan. Do
not block this
opening.
Surface audio inputs 8 analogue inputs:
4 mic/line XLR (skt 41-44)
2 stereo RCA pairs (skt 45-48)
Any socket can be patched to any channel.
The default is one-to-one mapping of sockets
to channels.
dSNAKE link
This is the GLD-80 to AR2412
AudioRack link. It carries audio
inputs from skt 1-32 and outputs
to skt 1-16. It also carries the
audio sends to the AudioRack
MONITOR port.
Connect using a CAT5 cable up
to 120m (396’) long.
The Lnk/Err indicator flashes at
a steady rate when the link is
established.
MIDI in and out
4-pin XLR Lamp socket.
We recommend the use
of the Allen & Heath
LEDlamp with built-in
dimmer.
Mains power IEC
input socket and
On/Off switch.
Surface audio outputs 6 analogue and 4
digital outputs
4 XLR line out (skt 21-24)
1 stereo RCA pair (skt 25/26)
1 SPDIF 2 channel digital out (skt 27/28)
1 AES 2 channel digital out (skt 29/30)
Any GLD signal can be patched to any socket.
Power On indicator
Ready indicator –
Lights yellow when
the output sockets
are ready to pass
audio after power up.
EXPANDER link
You can plug an AR84 expander
in here. This carries audio inputs
from skt 33-40 and outputs to skt
17-20.
The AR84 can be located near
the GLD-80 to provide more I/O
at the mixer, or up to 120m away
to provide more I/O on stage or
at a remote location.
Connect to using a CAT5 cable
up to 120m (396’) long.
The Lnk/Err indicator flashes at
a steady rate when the link is
established.
I/O Port See below
The LOC
K
indicator lights
when the audio is
sync locked
I/O Port options for system linking, expansion, recording and audio networking using one of the option
cards available from Allen & Heath. 64 channel bi-directional 48kHz audio.
Dante
A
CE
TM
MADI
EtherSound
Waves
MMO
GLD sockets can be patched using the I/O
screen.
ADAT
iDR out
Aviom
TM
Hearback
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GLD Digital Audio Mixing System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GLD Digital Audio Mixing System in the language / languages: English as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info