541367

Allen-Heath GLD Digital Audio Mixing System Manual

12
Zoom out
Zoom in
Previous page
1/32
Next page
GLD User Guide 12 AP8561 iss.2
GLD-80 Mixer controls
Copy/Paste/Reset Hold Copy down and
press any Sel or Mix key to put its related mix
or processing parameters on to the clipboard.
Then hold down Paste and press a strip Sel
or Mix key to paste its contents to that
channel. Hold Reset and press a key to reset
the related parameters to factory default.
Channel Processing Strip Analogue style processing
control section presenting the main controls for the
Preamp, HPF, Gate, PEQ and Compressor. Press the strip
Sel key to access the processing for the input or master
assigned to it. Further parameter control is available using
the touch screen Processing screen.
Touch Screen For status display, system
setup and memory management. To see
details and a graphical view of the
processing for the channel or master
currently selected make sure it is in
Processing mode. The keys select the
screen mode. Use the rotary control to
adjust the value of a highlighted parameter.
Routing select key to display the
assignments and sends for the
Selected strip in the touch screen
while in Processing mode.
Main / PAFL meters
Fader Banks 2 groups of motorised
faders with 4 layers each (80 control
strips). Provides control of the Input
channel, FX return, Mix master, DCA or
engineer’s Wedge or IEM monitor
assigned to it using the Setup / Control
screen.
Mute mutes the channel assigned to
the strip. It affects pre and post-fade
sends. The DCA indicator lights when
the channel is muted by a DCA master
assigned to it.
Sel opens the channel processing for
the selected strip.
Mix presents the sends for the selected
strip on faders and shows the related
assignments and pre/post settings in
the strip LCD displays.
PAFL selects either PFL (pre-fade
listen) or AFL (after fade listen)
according to preferences set in the
Setup / Audio screen. Input overrides
output (mix) PAFL.
Strip LCD display to
show channel status
information and user
defined Name and
Colour.
Press to Talk
Talkback source and
destination is
assigned using the
Setup / Audio screen.
USB ports For
transferring Show
files, Libraries and
event logs, stereo
playback and
recording to USB,
and for updating
system firmware.
Copy/Paste/Reset edit keys
A
ssign and Pre/Post access keys for the
selected mix.
While a Mix is active:
Hold down Assign and press strip Mix keys to
toggle the assignments on or off.
Hold down Pre/Post and press strip Sel keys to
toggle sends pre or post fade.
Toggle all on/off or pre/post while a master is
selected by pressing the master strip Mix or Sel
key instead of the channel keys.
The touch screen lower toolbar displays the
currently selected mix. You can return to the
Main mix by turning the selected Mix off, or by
turning on then off any other Mix key.
Alt View Hold down to view the channel or
socket numbers in place of the name in the LCD
displays. Set this preference in the Setup /
Control screen.
Strip rotary controls
Their function is selected
using these keys – Gain,
Pan, Custom 1 and 2
(assignable using the
Setup / Control screen).
Strip meters The top
red indicator lights when
a peak is detected at
any point in the channel
signal path. These
meters also display RTA
activity while in GEQ on
Faders mode.
SoftKeys 10 keys
with function assigned
using the Setup /
Control screen.
Headphones Level
control and ¼” and
3.5mm sockets.
Safes Make one or more channels
safe from Scene recall by holding
down the Safes key and then
pressing channel Mix keys. A
Safes Map is also available to
make selected parameters safe.
Freeze in Layers Hold down then
press strip Mix keys to temporarily
keep a channel visible across all
layers. To assign channels to
strips use the Setup / Control
screen.
GEQ on Faders Presents the
GEQ for a Selected mix on the
faders. Press to toggle between
high and low frequencies.
Frequency values are shown on the
strip LCD displays. The mix master
fader is presented on the right hand
strip while in this mode.
Help Touch the ?
button to open the
built-in Help Manual
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GLD Digital Audio Mixing System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GLD Digital Audio Mixing System in the language / languages: English as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info