541356
43
Zoom out
Zoom in
Previous page
1/54
Next page
42
TECHNICAL SUPPORT
Should you have any queries about the GL4000 console automation system please
quote the console model, serial number and software version number in any
communication with Allen & Heath or appointed service agent. The system has been
designed and tested to be reliable under the harsh conditions typical of live sound 'on
the road'. Should a problem be encountered check first that external equipment is
correctly connected and functional (or disconnected to test the console itself), that the
equipment has been correctly set up, and that the mains power is correct for the
console power unit. Error detection systems have been built in to assist with problem
investigation.
POWER UP AND POWER DOWN
The console settings are remembered when power is
removed from the console. A power down circuit detects
falling voltage and writes the settings to non-volatile memory.
On power up these settings are restored. Mains power
fluctuations ('brown-outs') are detected with error code
readout.
CONSOLE DC POWER INDICATORS
The console power unit converts mains voltage to the DC
supply rails required by the console. Each rail has an
associated indicator LED on the front panel. If a power rail
fault is suspected check that these LEDs are correctly
illuminated. Note that the optional RPSD2 dual power supply
monitor includes further power supply status monitoring.
SOFTWARE VERSION NUMBER
Press SHIFT + PREVIEW GROUP
The software version number is shown on the patch
display. For example, 1.23 is version V1.23
Release the keys to return to normal display.
SOFT RESET
Should the system lock up and fail to clear itself first press
the underpanel RESET button above the rear panel MIDI
sockets. This restarts the processor as if the console was
powered off and then on, except that the console may not
reset to the last active mute settings.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 4000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info