541356
41
Zoom out
Zoom in
Previous page
1/54
Next page
40
CHANNEL MUTES
Pressing any console mute switch transmits a MIDI Note On
message unless MIDI has been disabled. Similarly receiving
the correct Note On message will control the channel mute
unless it has been made 'mute safe' or MIDI disabled.
Console mutes are mapped to MIDI Note numbers as
shown. Running status is supported on receive and transmit.
TRANSMIT - Pressing a console mute transmits the
following Note On message:
9n cc vv cc 00
where n = console MIDI channel number
cc = console channel number
vv = 3FH for mute off, 7FH for mute on
RECEIVE - The console responds to the following MIDI
Note On message :
9n cc vv ( 00 is ignored)
MUTE PATCHES
Recalling a patch will transmit a MIDI Program Change
message unless the patch system is disabled or MIDI is
disabled. Similarly receiving the correct Program Change
message will recall a console patch unless disabled.
Console patches are directly mapped to MIDI Program
Change numbers 0 to 127. Running status is supported on
receive and transmit.
TRANSMIT and RECEIVE - The message format is :
Cn pp
where n = console MIDI channel number
pp = console patch number 0-127
MIDI DUMP FORMAT
The format for Dump In and Dump Out is identical. The
Dump is made up of 128 System Exclusive messages (or
packets) which contain the contents of the console memory.
TRANSMIT and RECEIVE - The format for a single packet
is as follows :
F0 <sysex header> <packet no.> <data> <checksum> F7
<sysex header> = 00 00 1A 50 05 VV vv nn
VV = major software version number V1.23
vv = minor software version number V1.23
nn = console MIDI channel number
<packet no.> = packet number from 0 to 127
<data> = 7 bit block of console data followed by a
number of 00 pad bytes.
<checksum> = checksum to allow error detection.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 4000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info