541356
42
Zoom out
Zoom in
Previous page
1/54
Next page
41
MIDI DUMP DATA
When a MIDI DUMP OUT is performed the entire contents
of the console memory is transmitted down the selected
MIDI channel. This includes the current console mute
settings, mute groups, patches, safe settings, solo settings,
console modes, and console MIDI channel number. When
a MIDI DUMP IN is received the console memory is
completely overwritten.
This is ideal when you want to archive settings and recall
them at a later date, for example a re-run of a previous
performance. You can also use the dump facility to program
additional GL4000 consoles, for example when setting up
duplicate shows or swapping consoles around.
MIDI DUMP OUT
Press SHIFT + STORE
The dump is started down the selected console MIDI
channel. If MIDI has been disabled (channel = OFF)
then nothing will happen when dump is activated.
The display flashes dPo during the duration of the
dump (around 15 seconds).
While dump is in progress the mute group and patch
system is locked out. However, the channel mutes
may be operated in the normal way so that live
operation may continue unaffected.
MIDI DUMP IN
The console responds automatically to the System Exclusive
dump in message formatted as above.
While the console is receiving dump in data the
display flashes dPI (around 15 seconds).
While dump is in progress the mute group and patch
system is locked out. However, the channel mutes
may be operated in the normal way so that live
operation may continue unaffected.
On completion the console restores normal operation
with the new memory settings in place.
DUMP ERRORS
If the console or connected equipment fails to respond to a MIDI
dump then check that the MIDI is correctly enabled on each. Check
that the cables are correctly plugged. In the event of a data error
being detected during a MIDI dump out or in the display will show
an error message code. Refer to the section on TECHNICAL
SUPPORT for an explaination of these.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 4000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info