541356
53
Zoom out
Zoom in
Previous page
1/54
Next page
52
INTERNAL LINK OPTIONS
The GL4000 is configured to satisfy most applications that should be
encountered. However, the following internal link options are offered for
those applications that may require alternative settings. These options
require access to the internal circuit assemblies and resoldering of circuit
board links. This work should be carried out by technically competent
personnel. Further information is available in the separately available
service manual and from your Allen & Heath agent.
MONO CHANNEL
Set individual aux sends to be
permanently pre-fader or post-
fader rather than switched. Re-
position wire links.
Set the pre-fade aux sends to
be pre-EQ rather than post-EQ.
Re-position a wire link.
Set the pre-fade aux links to be
pre-mute rather than post-mute.
Re-position a wire link.
Disable +48V phantom power
so that the panel switch has no
effect. Cut out the wire link.
STEREO CHANNEL
Set individual aux sends to be
permanently pre-fader or post-
fader rather than switched. Re-
position wire links.
Set the pre-fade aux sends to
be pre-EQ rather than post-EQ.
Re-position 2 wire links.
Set the pre-fade aux links to be
pre-mute rather than post-mute.
Re-position a wire link.
Disable +48V phantom power
so that the panel switch has no
effect. Cut out the wire link.
TALKBACK MIC +48V
Disable +48V phantom power
from the TB mic input XLR.
Remove a jumper link (fit on 1
pin to keep in console).
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 4000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info