541356
52
Zoom out
Zoom in
Previous page
1/54
Next page
51
OUTPUT LEVEL MATCHING AND BALANCE
This example shows the matrix and LR2 outputs feeding the speaker system. Here all
the output controls are grouped together at the top of the panel away from the normal
operating area. Select POST for LR2 so that the output follows the LR faders. Adjust
LEV to match the operating level of each amplifier to give the desired listening level with
optimum console signals (faders and meters operating around '0'). A correctly matched
system ensures the best signal-to-noise and headroom performance. The balance
between the speakers can also be adjusted using LEV. Press ON to turn on or off
selected speakers in the system, useful in checking the effect of each. Use AFL to
monitor each output post level control but pre ON switch.
OUTPUT DRIVE AND INSERTS
Select # OUT REV for interference free balanced XLR drive to the amplifiers. This
also provides an insert on each output for graphic EQ, delays and other signal
processing devices. Inserting graphics lets you tune the frequency response of each
speaker in the system for best clarity, acoustic correction and feedback reduction.
THE MATRIX MIX AND DELAY SPEAKERS
Use the matrix to create the required mix to the delay speakers which improves the
intelligability of the sound to the rear of the audience. The balance of the group signals
to the matrix may be different to the subgroups feeding LR to ensure that the focus of
the sound is not lost. Insert a delay unit to compensate for the acoustic delay from stage
to speakers. Insert a graphic EQ to compensate for the local acoustics and to remove
some LF and HF which may distract the listener from the true source of the sound.
MULTI-SPEAKER SYSTEM
6 Speaker system driven from the matrix and LR2
outputs. Provides output balance and level trim
independent of the mix levels. All outputs are
balanced XLR with inserts for EQ, delay or other
signal processors.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 4000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info