541356
13
Zoom out
Zoom in
Previous page
1/54
Next page
12
METERPOD CONNECTOR
Recessed 16-pin dual row header for connection to the meterpod.
LOCAL STEREO MONITOR
For connection to a stereo amplifier/speaker system for LR, AFL/
PFL monitoring local to the console.
3-pole 1/4" jack sockets (tip = hot). Impedance matched 50ohm
0dBu nominal line level.
HEADPHONES
Connections for 2 stereo headphones >8ohms. One connector is
on the front panel, the other is concealed under the armrest.
3-pole 1/4" jack sockets (tip = left, ring = right).
MATRIX OUTPUT
3-pole 1/4" jack socket (tip = hot). Impedance balanced 50ohm
0dBu nominal line level.
Can swap with the aux output XLRs and inserts to drive long cable
runs without loss or interference, and to insert external signal
processing devices such as graphic equalisers and delays.
LR2 OUTPUT
Secondary LR output for 2-track recording, broadcast or additional
speaker and zone feeds.
3-pole 1/4" jack socket (tip = hot). Impedance balanced 50ohm
0dBu nominal line level.
Can swap with the aux output XLRs and inserts to drive long cable
runs without loss or interference, and to insert external signal
processing devices such as graphic equalisers and delays.
2-TRACK RETURN INPUT
For connection to 2-track playback equipment such as cassette,
DAT or CD players.
3-pole 1/4" jack sockets (tip = signal). Unbalanced 50ohm. +10dB
maximum gain allows connection to low and high level equipment.
MIDI INTERFACE
Standard 5-pin 180' connectors for opto-isolated connection to
other MIDI equipment. A mute processor reset switch is provided.
CONSOLE DC POWER INPUT
The console connects to a separate power supply unit via a 10-pin
circular connector cable. Connect only the Allen & Heath power
unit supplied with the console.
A chassis ground terminal post is provided. This connects to mains
earth through the power cable.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 4000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info