541356
15
Zoom out
Zoom in
Previous page
1/54
Next page
14
DO NOT OBSTRUCT VENTILATION OPEN INGS.
SEE INSTA LLATION INS TRUCTIONS BEFOR E CO NNECTING TO THE SUPPLY.
ALLOW ADEQUATE VENTILATION AROUND THE UNIT.
V-
CARACTERISTIQUES.
T 10A 250V 20mm
DC FU SES
REPLACE FUSE WITH SAME TYPE AND RATING.
ATTENTION: REMPLACER LE FUSIBLE AVEC UN DES MEMES
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE
V+
OFFON
ALLOW ADEQUATE VENTILATION AROUND THE UNIT.
DO NOT OBSTRUCT VENTILATION OPENINGS.
WARNING - THIS APPARATUS MUST BE EARTHED.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE
SERIAL No:
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
CAUTION
WITH SAME TYPE AND RATING.
ATTENTION: REMPLACER LE FUSIBLE AVEC UN DES MEMES CARACTERISTIQUES.
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE REPLACE FUSE
NO USER SERVICEABLE PARTS INSIDE
FUSE TYPE AC SUPPLY
T 5.0A 20mm 100 - 120V~
T 3.15A 20mm 220 - 240V~
47-63Hz
300W MAX
320VA MAX
AC MAINS IN ~
CONNECTING THE POWER UNIT
Connect only the Allen & Heath power unit specified for the console. The standard unit for GL4000
is the RPS11. This is an external 3U 19" rack mounted unit that connects to the console via the
separate DC cable supplied. The RPS11 is a low noise linear design that converts AC mains voltage
to the DC voltages required to power the console. It also provides +48V phantom power for use with
high quality powered microphones. The presence of AC mains voltage is shown on the power unit
front panel neon indicator. The presence of the DC voltages is shown on the console power indicator
LEDs. A second backup RPS11 may be connected to the console through the optional RPSD-2 dual
supply combiner unit available from your Allen & Heath agent if required.
SAFETY WARNINGS !
Ensure that the warnings printed on
the power unit (shown here) are
followed.
Always switch the power unit off before
connecting or disconnecting the
console power cable.
It is normal for the power unit to dissipate
heat. Do not cover the unit or position
it on soft furnishings during operation.
Do not position other equipment known
to generate significant amounts of heat
below the unit. It is recommended that
rack units containing high power
amplifiers and other heat dissipating
equipment are fitted with cooling fans.
BEFORE SWITCHING ON !
Check that the voltage indicated on the
fuseholder is correct for the mains
voltage in your area.
Check that the mains IEC connector is
fully inserted into the inlet socket.
Check that the DC power cable is
correctly fitted to both the power unit
and the console. The locking ring
should be screwed in place.
It is recommended that audio power
amplifiers are switched on last and
switched off first to prevent possible
damage to loudspeakers.
Check the system for safety earthing.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 4000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info