541356
12
Zoom out
Zoom in
Previous page
1/54
Next page
11
SYS-LINK EXPANDER OPTION
Available as a kit to be fitted to the console to expand the busses.
Uses 4 25-pin D-type connectors (input and output A and B).
Operates at -2dBu line level. Refer to your Allen & Heath agent for
further details.
GROUP/AUX/L/R/M INSERT SEND
Used to send the output signal to external effects and signal
processing equipment such as graphic equalisers, delays and
compressors, post-mix amp and pre-fader.
3-pole 1/4" jack socket (tip = hot).
Impedance balanced -2dBu 50ohm line level.
GROUP/AUX/L/R/M INSERT RETURN
Used to return the processed signal from external equipment into
the output audio signal path pre-fader and mix meter.
3-pole 1/4" jack socket (tip = hot). Balanced >10kohm -2dBu line
level.
GROUP/AUX/L/R/M MAIN OUTPUT
3-pin male XLR (pin 2 = hot). Electronically balanced 75ohm.
+4dBu line level, +27dBu maximum into 600 ohm load.
Capable of driving long cable runs without loss or interference.
MODE SWITCHING
Set the underpanel mode switches for the intended console
operation. Some of these affect the way the connectors work. For
full details please refer to the BLOCK DIAGRAM.
OUT REV underpanel mode switch - The Aux XLRs and
inserts can swap with the Matrix and LR2 output jacks for aux
(effects) sends on jacks if required. This also provides matrix and
LR2 outputs on XLRs with inserts for driving speaker systems.
MONO MODE underpanel mode switch - The Mono output
becomes the engineers listen wedge monitor feed when the
console is operated in on-stage monitor mode. However, the Mono
insert remains with the mono mix.
MIX/AUX REV underpanel mode switch - Note that while the
front panel control sections are swapped when the reverse mode
switches are pressed, the signals always appear at their related
connectors, ie. the connectors do not swap.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 4000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info