28962
62
Zoom out
Zoom in
Previous page
1/75
Next page
62
FLAP-ELEVATOR MIXING
This feature is used when you deploy the flaps. Normally when you drop the flaps on a aircraft it will start to climb.
Adding some down elevator will help reduce it. Adjustment is from (100)~(-100)%.
NOTE 1: Basic must be turned OFF before this feature will operate see page 70.
From the Main screen, press the CH+ key until the P-F displays in the CH screen area. Now use the FUNCTION down
key to select the F>E screen. Use the INC/YES or DEC/NO keys to set the persentages.
SPOIR (SPOIRON)
The RD6000 Super has the ability to control different fixed wing aircraft wing types, including conventional single
aileron servo or dual aileron servos on individual channels with differential adjustment and wings with flaperons/
spoilerons. The Spoiron function is normally used with sailplanes.
Use the CH+ key to move the CH indicator to etc. Now use the FUNCTION down key to display the SPOIR screen.
Activate the SPOIR by pressing the YES or NO keys.
In order to use two separate aileron servo channels and/or have electronic aileron differential, press the INC +/YES
key to make the SPOIR read ACT (Active). Note that it is only possible to electronically adjust aileron differential
throw, when you choose to use TWO CHANNELS for aileron, with a servo on each side of the wing driving that wing’s
servo. Pressing the INC +/YES or the DEC -/NO key will toggle the function between “INH” and “ACT” settings.
When SPOIR is ACTIVE, you will have two channels assigned to the aileron/spoileron function. Plug these servos
into channels #2 and #6 of your receiver. Note that both servos will respond equally when you move the aileron stick
on the transmitter.
If AL-DIF (Aileron Differential) see page 63, is set to 0%, the servos will move equally in response to left and right
transmitter aileron stick movement. If a value is inserted for AL-DIF when using the SPOIR function, the FLAP STICK
(throttle) will determine when AL-DIF becomes effective for a sailplane.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics RD6000super at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics RD6000super in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info