28962

Airtronics RD6000super Manual

60
Zoom out
Zoom in
Previous page
1/75
Next page
60
ELEVATOR-FLAP MIXING
When you use this function you can cause the flaps to deploy when the elevator control stick is moved up or down. It
can be used with a separete flap servo with an output on the receivers channel #6 or as flaperons with two aileron
servos on channel #2 and #6. This function is most commonly used for aerobatic models where deploying flaps (or
flaperons), with elevator control can make for tighter corners on maneuvers such as the square loop. In order to use
this function with the two aileron servo option you must first active the FLAPERON function. To activate, move the
channel selector by pressing the CH+ key until you reach “etc”. Now press the FUNCTION DOWN key several times
to reach the “FLAPE” screen and use the YES or No keys to active. Press the END key 2 times to return to the Main
screen.
NOTE 1:BASIC must be turned OFF for this feature to operate see page 70.
NOTE2: Flap switch must be in the defauft off position “UP”. When activating the FLAPE function, if both servos
move off center when activating the FLAPE function than move the flap switch down. This will keep the centering of
the servos correct.
Next press the CH+ key to move to the “EL” indicator. Press the FUNCTION down key until you reach E>F 0% screen.
Now you can add elevator to flap amount. Adjustment is from 0~100%.
CAUTION:
Once you activate the E>F mixer by setting in a value, it will be active at all times and the aircraft will respond to all
control inputs since you cannot turn it on or off with a switch. You can use a COMPENSATION Mixer feature to be
able to use a switch instead.
Bottom View
Left Wing Channel #3
Right Wing Channel #2
Servo linkage most be on the outer side of the servo when mounted like above example.
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics RD6000super at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics RD6000super in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info