Manual Airtronics RD6000super (page 61 of 75) (English)

28962

Zoom out

Zoom in

1/75

When you use this function you can cause the ailerons to move left and right when the rudder control stick is moved

left or right. The purpose of this mixer is to allow onw transmitter control input to affect flight functions. A common

use would be in knife edge flight where you need a small correction in aileron to prevent roll coupleing. To set-up such

a mix, use the CH+ key to select RU on the CH indicator.

Next press the FUNCTION down key until you reach R>A 0% screen. Now you can add rudder to aileron mix.

Adjustment is from 100~-100%.

You can set both left and right rudder to aileron mix seperatly. By moving the rudder stick you will see the left or right

indicater display on the screen. For example you can set left mix at 20% and right at -30% depending on the direction

you need for the mix.

NOTE 1:BASIC must be turned OFF for this feature to operate see page 70.

CAUTION:

Once you activate the R>A mixer by setting in a value, it will be active at all times and the aircraft will respond to all

control inputs since you cannot turn it on or off with a switch. You can use a COMPENSATION Mixer feature to be

able to use a switch instead.

RUDDER-AILERON MIXING

RUDDER-ELEVATOR MIXING

Rudder to elevator mixing is used for example when in a knife edge flight, the aircraft pulls to the belly or canopy

when rudder is added.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics RD6000super in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Airtronics RD6000super Manual

Product: