666219
37
Zoom out
Zoom in
Previous page
1/63
Next page
MlDl
MlDl
Setup
/
,MIDI
THRU
OFF
I
ON:
MlDl THRU
OFF:
MlDl OUT
Note:
When the terminal is set to MlDl
THRU,
the
9010
does not transmit any of its own MlDl mes-
sages to the connected MlDl device. For exam-
ple, Patch program changes made on the 9010 will
not select programs on the connected device.
Program Number Assignment-Program Change
Number
This function and the one following (Effect Pro-
gram Number) are used together to assign specific
MlDl program change numbers to specific 9010
Patch numbers. Using these two functions, for
example, you can select program
#3
on a con-
nected synthesizer and call up Patch program
#I5
on the 9010. Brackets around "Prog" in the dis-
play indicate that the program change number can
be assigned.
Indicates selection of User bank.
MIDI
r-I
Prog No.
Assign
Brackets indicate selection of
program change assign.
Range: 0
--
127
Program numbers can be assigned to change
programs in any of the various banks of the 9010:
Preset, User,
and
the three
RAM
Card banks. The
program numbers for the various banks are select-
ed by turning the EDIT DlAL when the arrow in the
LCD
is
at the program number value and the DlAL
key's LED is red. The banks are selected in the
follo wing order: User,
RAM
Card
1,
RAM Card
2
and RAM Card
3.
The bank name appears in
capital letters at the top of the LCD.
Program Number Assignment-Effect Program
Number
This function is used with the one above (Program
Change Number) to assign specific MlDl program
change numbers to specific 9010 Patch numbers.
Brackets around "Patch" in the display indicate
that the Patch program number can be assigned.
I
MlDl
USER
Prog
No.
Assign
Prog
=
0
,[Patch],
=
01
Brackets indicate selection
of
Patch programassign.
Range:
01
-
60
More
on
Patch Program/Program Change Assignment
The user memory space to which Patch programs are
stored is from
1
to
60,
and programs can be stored to
any memory location regardless of the Routing
(Group) that is selected.
-
--
RTG
PATCH
PROGRAM
RTG
3
PATCH PROGRAM
.
.
-
.
-
-
-
-
-
-
- - - - -
.
.
.
.
.
- -
-
-
-
.
-
-
-
.
.
.
-
.
-
-
-
-
-
RTG
3
PATCH PROGRAM
---------..-.------
RTG
I
PATCH PROGRAM
--------.--.-.-.-------------
-.------
RTG
4
PATCH PROGRAM
.---.-----.-----.
--.----
RTG
2
PATCH PROGRAM
RTG
2
PATCH PROGRAM
...
..-....-.-.----..-------- -...-.--.
RTG
4
PATCH PROGRAM
When Patch programs are stored in user memory as
shown above:
1. The directory of the Patch store mode displays
1
-
8
in order.
2.
Incoming MlDl program change messages will be
ignored by the Patches of other Groups
and
empty
memory locations.
For example:
When Group
1
is selected,
1
and
4
are selected
by
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom 9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 9010 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info