666219
35
Zoom out
Zoom in
Previous page
1/63
Next page
Setting
the
Basic Channel
ON:
Responds to program change messages.
OFF: Does not respond to program change mes-
This function's display is the first to appear when
sages.
you select the MlDl mode. In this function, both
the
MIDI send and MlDl receive channels are set
Turning on program change reception allows you
to the value of the basic channel.
to select a program change number on another
MlDl MlDl
Setup
1
,BASIC
Channel
01
Range:
1
-
16
Program Change Transmission
This function allows you to determine whether
selection of an internal Patch program on the 9010
will also send a corresponding program change
message via MlDl to an external device or not.
MlDl
MlDl
Setup
ON
ON: Transmits program change message.
OFF:
Does not transmit program change mes-
sage.
An ON setting would be useful
if
you have other
effect units connected by MlDl to the 9010. This
would allow you to change programs on those
devices as well, changing your entire effect
system with the selection of one program.
Program Change Reception
This
function allows you to determine whether the
9010
will respond to incoming program change
messages for selection of internal Patch programs.
MIDI
MIDI
Setup
I
tRxProgChg.
ON
MlDl device (for example,
a
synthesizer) and call
up the same numbered Patch program on the 9010.
Note: The Patch program numbers of the 9010 start
with 1, whereas the starting program change num-
ber of the MlDl standard is 0. This means that a
MlDl program change number will correspond to
the next highest Patch program number on the
9010. In other words, if you select MlDl program
change number
3,
the 9010 will change to Patch
program number
4.
You can, also assign Patch numbers to MlDl pro-
gram change numbers; for example, having pro-
gram change
#3
call
up
Patch program #15.
Refer
to the Program Number Assignment sections
below for details.
MlDl
Bank Select Transmission (Reception)
This menu allows you to determine whether or not
the bank number indication is transmitted or receiv-
ed along with the Patch program number when
internal Patch numbers are selected.
ON:
Bank number is transmitted received.
OFF: Bank number is not transmitted received.
Note:
This function should be set to OFF if the
connected MlDl devices do not have multiple
memory banks.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom 9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 9010 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info