644523
23
Zoom out
Zoom in
Previous page
1/52
Next page
23
tor should be in the working area
when the working area is very dan-
gerous.
During working and parking you have
to take care of the stability of the
machine to avoid dangers.
2.5 Maintenance
A TT ENT IO N
No cleaning, upkeep, checks or main-
tenance when machine is running
Be safe: Shut off the machine, let it cool
down, disconnect spark plug cap from
spark plug.
The machine does not require intense mainten-
ance. However, to ensure a long lifespan, we
strongly recommend following the upkeep and
maintenance plan.
Repairs must be carried out by specialists! Use
original ZIPPER parts only!
2.5.1 Upkeep and maintenance plan
Controls for the maintenance of the machine
Controlling the fuel
level
Regularly prior to each
operation
Loose or lost screws
Regularly prior to each
operation
Damage of any parts
Regularly prior to each
operation
Function of the con-
trol system part
Regularly prior to each
operation
Controlling the oil
level
Regularly prior to each
operation
Cleaning the machine
Regularly after opera-
tion
Take care of oil or
fuel stains under the
machine!
Regularly prior to each
operation
Cleaning the spark
plug
Every 25 working
hours
Cleaning the air filter
Every 20-30 working
hours
Controlling the belt
Regularly prior to each
operation
2.5.2 Controlling the engine oil
Set the plate compactor after 10 hours
standing time on a safe, smooth ground.
Remove the dipstick (Fig. H) and wipe it
clean.
Launch the dipstick into the oil tank with-
out screwing. Pull out the dipstick again
and control the oil level on the dipstick.
When there’s too less oil in the tank (Fig.
J) you have to refill with recommended oil
(following list) till the edge of the tank.
The maximum tank capacity is 400 cc.
ATTENTION!
A low oil level causes damag-
es of the engine and contracts
the life time of your machine.
Guarantee demands are out of
the question at deficient
upkeep and maintenance
workings.
2.5.3 Changing the engine oil
The engine oil should be changed after
the first 20 operation hours and then
every 100 operation hours.
The oil is changed easier when it is warm
after operation.
For changing you can drain the old oil by
removing the oil filter cap and the screw
on the engine base.
Ensure that the crankcase is filled with
the recommended oil (see 2.5.2)
Recommended oil
Season
Temperature
Oil type
Summer
25°C or higher
SAE 10W-30
Spring/Autumn
25°C to 10°C
SAE 10W-
30/20
Winter
0° C or lower
SAE 10W- 10
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zipper ZI-RPE60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zipper ZI-RPE60 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info