539643
90
Zoom out
Zoom in
Previous page
1/92
Next page
Pour dirty water out including the dirtiness form the tank and rinse the tank.
Insert the water filter without paper bag and filtration pad.
Place the tank at the base and close the top lid.
Remove the nozzle or the brush, which was used earlier
and fit the nozzle for wet clearing on the sucking tube.
90
Remove the back tank:
open the top lid and bring it to vertical position 1.
move the tank up and then move it back 2.
Remove the inlet pin and fill the tank up with cleaning agents
(the powder solution or liquid), according to the label:
1. Powder, cleaning solution preparation: dissolve the content
of the bag in 2,5 – 3l of warm water- temp. up to 45ºC.
2. Cleaning liquid: pour the measured portion of the liquid into
the back tank. 1 pin of liquid for 3,5l water.
Depending on the applied clearing agent, fill the back tank up with prepared solution or warm water
with temp. up to 45ºC.
Insert the pin into the inlet in back tank.
ZELMER S.A. warranties good cleaning effect and proper vacuum cleaner operation, only using the
cleaning agents and their amount approved by ZELMER S.A., which is indicated at the label:
„DYWANOPUC” cleaning powder manufactured by OKTIMA,Poland,
„CARPEX” cleaning liquid manufactured by ASTRA POLLENA, Poland,
„FOUNTAINHEAD” cleaning liquid manufactured by Butcher’s, USA
Place the tank in previous place and push it in to fasten it exactly at the vacuum
cleaner housing.
Close the top lid.
ATTENTION !!! The vacuum cleaner is equipped by the manufacturer with one
of the a/m cleaning agents only.
CLEANING CARPETS
heck the colours resistance before wet cleaning.
Put a small amount of cleaning agent on white cloth (powder solution or liquid) and clean the carpet in
the least visible place. If the cloth will be coloured, it means that the carpet does not have permanent
colours and can not be cleaned this way.
To protect against foam generation, or when it is generated during cleaning, use the anti-
foaming agent recommended by ZELMER S.A., in amount and way explained at the label:
“G 478 Entschäumer D” manufactured by BUZIL, Germany.
„FOAM-FREE” provided by Butcher’s, US.
ATTENTION!!! The vacuum cleaner is equipped by the manufacturer with one
of the a/m cleaning agents only.
Remove the brush strip from the nozzle
Check the right direction of nozzle movement on the carpet, so that it has the least
friction.
Press the pump on/off button in and switch
the vacuum cleaner on.
ATTENTION!!! You can switch the pump on only, when there is water
inside the back tank. The lack of water is indicated with very noisy pump operation.
Press the adjusting button at the hose handle to adjust the water flow to the nozzle.
Move the nozzle along the carpet with forward and backward movements.
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 619 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 619 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info