539643

Zelmer 619 Manual

92
Zoom out
Zoom in
Previous page
1/92
Next page
92
− Remove the water filter from the tank.
− Remove the foam filter from the water filter and rinse it under running water
from the inside of the foam.
ATTENTION!!! Do not wash the filtration foam in hand by wringing it or in
washing machines Avoid squashing, stretching or
deformation. Dry after washing in ambient temperature
straightened or hanged on the handle.
Never dry the foam on the heaters, radiators, ovens, etc.
− Pour the dirty water out through the inlet for hose assembling.
− Clean the tank and water filter thoroughly, change the water some times.
− After washing clean thoroughly all the elements of accessories used during this
process (hose, tubes, accessories).
Leaving the a/m parts unclean or not exactly cleaned can cause the loss of
filtration abilities of the pads and foam and enhance bacteria and mites development.
− Dry all the cleaned parts thoroughly.
ATTENTION!!! Never assemble the vacuum cleaner before drying cleaned parts.
− Insert the water filter, place the tank on the base and close the top lid.
FILTERS REPLACEMENT
Air-inlet and air-outlet filters get dirty during operation. It is recommended to flush air-inlet filter to
provide proper operation. Very dirty or damaged air-inlet filter must be replaced with a new one.
Air inlet filter replacing
− Open the vacuum cleaner lid and place it in vertical position.
− Catch the upper edge of the filter grid (from the front) and pull it slightly in your
direction until it gets out of the hooks.
− Turn the frame, remove the filter, rinse it under running water, press slightly, dry
and replace (or replace with a new one).
− Place the new filter thoroughly, so that after closing the frame, its edges were
tightly pressing the filter edge.
− Close the filter frame.
Air-outlet filter
The air-outlet filter should be exchanged after about 30 operational hours (6 months),
or earlier in case of strong dirtiness.
− Press the cocker and open the outlet cover.
− Exchange the filter insert:
Type 619.5*E – fig. A; Type 619.5*S – fig. B
Electrostatic filter Cassette with HEPA filter
B
− Insert the filter thoroughly (fig. A), so
that after closing the frame, its edges
were tightly pressing the filter edge.
A
If any water occurs at air-outlet filter, it means that there is some foam inside the front tank,
which condenses at the air-outlet filter, after getting through the turbine. In order to avoid such
phenomenon it is required to add foam neutralizing agent recommended by ZELMER S.A., and
switch on for some minutes (without front tank) in order to dry the suction system.
Air-outlet filter should be always replaced with a brand- new, original one.
ECOLOGY
At the end the product’s useful life, please dispose of it at appropriate collection points
provided in your country.
619-195
… 92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 619 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 619 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info