539643
89
Zoom out
Zoom in
Previous page
1/92
Next page
In such case:
Switch the vacuum cleaner off for several seconds and then switch it on again and continue
vacuuming.
LIQUID SUCTION
If you want to use your vacuum cleaner for liquid suction, please prepare it like for dry surface
cleaning, apart from:
1. Front tank should be empty (without water).
2. Do not apply any filtration pads or paper bag.
3. Apply the spraying nozzles (big or small), described below.
ATTENTION!!! In any case do not start up the vacuum cleaner with full tank! Do not pick up big
amount of liquid in one cleaning (i.e. with hose immersed in water).
If „MAX” level is exceeded during liquid suction, the float shall automatically block the suction.
In such case:
Apply the same method as in case of suction blocking caused by dirty foam filter (increased engine
rotation).
WET CLEANING – accessories
Big spraying nozzle – It is applied for water suction and wet cleaning.
Small spraying nozzle – It is applied for wet
cleaning of small upholstered surfaces, i.e. chairs,
armchairs, sofas, car upholstery, etc.
89
Brush strip – to be fitted on big spraying nozzle. It is applied for water suction from
hard surfaces, i.e. parquet, lino, ceramic tiles, etc. and wet cleaning.
Two sucking tubes set (for washing function) – they
connect the hose with proper nozzle. You can use both or
one tube depending on your needs.
Buton
Sucking
hose
Handle
Power suction
regulator
Sucking hose (for washing function) – is the basic equipment of the vacuum
cleaner. The flexibility makes possible to manipulate with different parts of
accessories. The hose handle includes:
1. The two-functions button:
Water flow to nozzle releasing – press the button
according to the arrow
.
Water flow to nozzle releasing with buttons stoppage –
press the button and move it back according to the arrow
.
2. The inlet with suction power adjusting. Do not open it during water suction or wet cleaning.
Preparations for wet cleaning
Vacuum the surface thoroughly before wet cleaning and then prepare the surface for wet cleaning,
the following way:
Switch the vacuum cleaner off and unplug it.
Turn the ending of the hose up to the position where the tops
on the hose
ending and tank cover each other and remove the hose from the tank.
Open the top lid and remove the front tank.
Remove the water tank.
Remove the rubbish from the filter housing cup or remove the paper bag.
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 619 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 619 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info