Manual Zelmer 481 (page 74 of 78) (English, Polish)

539098

Zoom out

Zoom in

1/78

78 481-017_v01

In order to increase the rotation immediately, regardless

set speed, press and hold one of „turbo” buttons (on the right

or left side of the casing).

When you want to return to the previously selected

●

speed release „turbo” button.

Preparing for operations

Wash the parts in contact with processed product before

rst usage.

Operate the mixer so, that the closed/open markings

located on the appliance are well visible.

Operation with whisks or mixers (Fig. D)

The whisks are intended to whipping eggs white foam,

●

cream, rubbing yolks with sugar, cream and pancakes or

omelettes dough preparation.

The mixers are intended to work the rubbed dough, yeast

●

dough, cheeses cakes, imbirbread cakes, etc.

The whisks and mixers shall be assembled in sockets on

●

the bottom of the robot.

Press until you feel the refusal – when the clamps get

fastened.

When assembled improperly, the parts fall apart

during operation.

Insert the mixer or whisk with toothed bar into the socket

marked with a star.

The reverse assembling of the mixers can

cause lifting up the dough (taking the dough

out of bowl).

The level of products inside the bowl should

not exceed the hight of mixers or whisks

working part (L).

Operation with liquidising disc (Fig. E)

Liquidizing disc is used for liquidizing boiled fruit and

●

vegetables such as: carrots, potatoes, tomatoes, apples

through the sieve. It partly replaces the function of the

mixing adapter.

Insert the liquidizing disc on the whisk with toothed bar

from the bottom side.

Insert the whisk into the socket marked with a star.

Cup (12)

Made of transparent material is used as a container when

mixing adapter is used.

Operation with mixing adapter (Fig. F)

You can use the mixing adapter for:

mixing liquids,

●

crumbling boiled vegetables and raw, soft fruit,

●

preparing different mayonnaise and pastes,

●

preparing soups for infants.

●

You can assemble the adapter after moving the cover.

Gently press the bolt and slide towards the direction

shown in the gure.

Insert the threaded part into the motor casing hole and

screw it turning right until you feel the refusal.

Inadequate screwing of the mixing adapter can

result in clutch damage or the adapter damage.

Put the adapter into the processed product and switch

the mixer on.

Operation with mixing cup (Fig. G)

Hold the mixer in your hand all the time during

operation.

Mixing cup is intended for infant soups preparation, milk

shakes or pancake dough.

It has the label „500 ml max” on both sides, which

indicates the maximum level of product to ll the cup and

graphic scale to determine the volume 200 ml to 500 ml

(according to the symbols in the drawing beside).

After moving the cover (like during assembling the

adapter) assemble the cup the following way: Insert the

mixing cup on the motor part so that the 3 buckles visible at

the bottom of the cup got into the nuts of the motor casing.

Holding the motor casing handle turn the cup clockwise

direction until you feel the refusal.

You shall obtain the proper connection, when the 3 buckles get

under the motor casing, and the fastener on the cup rib move

on the other side of the spherical buckle on the motor casing.

Fill the cup with products and put the cover with the doser

on – you can add next products to the cup during operation.

Operation with stand including turnable bowl (Fig. H)

The stand with assembled motor part makes the operation

with whisks or mixers easy, as the user does not have to hold

the device.

The housing with the bowl is equipped with a self

gathering spatula, which is an innovative solution. It

helps to effectively blend the products, prevents the dough

from gathering on the edges of the bowl and shortens the

preparation time.

The stand head driver automatically makes the head move

pendulum-like and simultaneously turns the bowl with the

mixed product.

You can use the stand with specially prepared whisks and

mixers only. The device equipped with stand includes also

one mixer and one whisk with toothed bar.

Insert the mixers or whisks into the motor casing (as

described above).

Assemble the drive in the stand head after moving the

cover (like during assembling the adapter) the following way:

Insert the drive fasteners (which are located near the holes

for whisks assembling) under the stand head fastener.

1 cm L 1 cm L

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 481 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer 481 Manual

Product: