539098
73
Zoom out
Zoom in
Previous page
1/78
Next page
77481-017_v01
Technical data
Technical parameters are quoted at product nameplate.
Permitted motor operation time:
with mixers, whisks 10 min.
with mixing adapter or mixing cup 3 min.
with the mini food processor 2 min.
with the ice crusher 2 min.
Interval time before next operation (min.) 20 min.
Noise caused by the device (L
WA
):
with mixers, whisks, mixing adapter,
on the stand 80 dB/A
with mixing cup 84 dB/A
with the mini food processor 87 dB/A
with the ice crusher 84 dB/A
The mixers are produced in II insulation class, they don’t
need grounding.
ZELMER mixers meet current norms requirements.
The devices meet the requirements of the directives:
Low Voltage Device (LVD) – 2006/95/EC.
Electromagnetic compatibility (EMC) – 2004/108/EC.
The product is marked with CE on the name plate.
Appliance elements (Fig. A)
1
Mixer motor
2
Pusher button
3
Switch lever
4
Turbo button
5
Whisks or mixers sockets
6
Mixing adapter hole
7
Handle insert
8
Mixers: left / right with toothed bar
9
Whisks: left / right with toothed bar
10
Liquidising dics
11
Mixing attachment
12
Cup
13
Mixing cup
14
Doser
15
Lid
16
Knife cup
17
Stand (with scales type 481.67 or without scales other
models)
18
Head
19
Grip knob
20
Fastening button
21
Blockade control (type 481.67)
22
Rotating bowl
23
Steel rotating bowl
24
Toothed wheel rim for steel rotating bowl
25
Scraper blade
26
Blade
27
Display and scales keypad
28
Display
29
ON/OFF – the button to switch the scales off and on
30
Tarring knob TARE
31
Unit change button UNIT
32
Food processor lid with gearbox
33
Ice crusher container
34
Limiting ring
35
Double-sided disc of ice crusher for rst level granulation
“I” (smaller size
A
) and second level granulation “II”
(bigger sizey
B
)
36
Mini food processor blade
37
Cover
38
Spindle
39
Mini food processor container
40
Mini food processor base
ZELMER mixers types (Fig. B)
basic mixer equipment
additional equipment, which you can buy in shops
Device description
The mixer has 5 speed positions. The lever is used to set
up the particular rotation speed according to the numbers:
0, 1, 2, 3, 4, and 5 on pusher button, which helps to remove
(push out) the mixers or whisks from the mixer motor part.
Additionally, the drive has
„turbo” button which helps to
get the maximum rotation speed immediately, regardless
the speed set with the lever. Such buttons are placed
both on the right and left sides of the casing intended for
the convenience of both left and right-handed users. The
„turbo” button is automatically blocked in „0” position.
There are 2 sockets (holes), for whisks or mixers
assembling, placed on the bottom of the motor part.
The insert handle, placed on the top of the motor part, is
made of the material increasing the comfort of holding the
mixer motor part - SOFTTOUCH.
There is a hole for mixing adapter or mixing cup assembling
at the back of motor casing. The hole is covered with
a mobile cover.
Mixer start-up and position setting
(rotation speed) (Fig. C)
1
Place the ON/OFF switch in the “0” position - the
leftmost position. Install the selected tool.
Plug in the appliance.
Switch on the appliance by sliding the switch to the right.
2
If you want to increase the rotation shift the lever in
position „5” direction, choose the desired rotation speed.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 481 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 481 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info