Manual Zelmer 481 (page 77 of 78) (English, Polish)

539098

Zoom out

Zoom in

1/78

81481-017_v01

The mini food processor blades are very

sharp. Be very careful during assembling,

disassembling or during cleaning. Store the

knife inside the cover for safety reasons.

Do not mill too hard products, such as: coffee

grains, nutmeg, ice cubes etc.

Before chopping a bigger pieces of product,

cut it into smaller pieces – approximately 1 cm.

The chopping process can not last longer than

45 s. Wait until the motor cools down before

you start up the blender again.

In case the products stick to the blades or the internal walls

of the container:

switch off the appliance, –

remove the motor with the cover, –

remove the products out of the blade and walls, –

re-assemble the appliance – as dened above and –

continue the operation.

Approximate time for processing of selected

products for the recommended gear

Product

Recommended

gear

Processing

time

5 20-30 s

5 25-30 s

1/4

3-5 15 s

5 40 s

( ×30)

5 10 s

5 15 s

5 30 s

5 20 s

The processing time can be shortened depending how thick

the nal product particles should be.

OPERATION WITH ICE CRUSHER

The appliance characteristics

Zelmer food processor is equipped with the ice crusher which

is used for crushing ice and e.g. frozen fruit.

You can use the crusher only with the container

and lid of mini food processor!

Application of the accessories

Doublesided disc – is used for crushing, grinding ice and

frozen products. The disc is round, the blades are double-

sided. One side, which we recognize by the applied plastic

fteen-pointed star, g.

is used for rst level grinding

„I” (smaller particles of grinded product), the other side is

used for second level grinding „II” (bigger particles of grinded

product) and it is marked with sevenŁpointed star g

Spindle

– is used for xing the disc.

Preparation of the ice crusher

Before assembling and disassembling the food

processor motor drive of the ice crusher, make

sure that the supply cord plug is disconnected

from the mains supply outlet.

Wash the parts in contact with processed product before

rst usage.

Operate the mixer so, that the closed/open markings

located on the appliance are well visible.

Operation with ice crusher (g. K)

Place the base

on rm, at and dry surface.

Insert the mini food processor container

in the

base

Place the disc for ice

on the spindle

(double -

sided disc), so that the blades provided for operation are on

the top.

Place the disc with the spindle inside the mini food

processor container

so that the pivot protruding from the

container is inserted into the spindle orice.

Insert the ice crusher container

on the fasteners

of the mini food processor container, and then lock the ice

crusher container, turning it until you can feel it is blocked.

Place the processed products inside the container

not exceeding MAX level.

When you ll up the crusher container

with

appropriate amount of processed product (do not

exceed MAX level) center the spindle

(put in the

middle) to enable its proper coupling with the mini food

processor lid

Screw the lid of mini food processor

to food processor

drive (in clockwise direction), until you feel it is blocked.

Further excessive turning the lid of mini food

processor can lead to damage.

Place the mini food processor lid

on the container

300 g

(500 ml)

200 g

(500 ml)

250 g

(500 ml)

250-300 g

(400-500 ml)

1 cm

200 g

(500 ml)

20 g

(500 ml)

1 piece

(2 cm)

300 g

1/8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 481 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer 481 Manual

Product: