539098
78
Zoom out
Zoom in
Previous page
1/78
Next page
82 481-017_v01
The manufacturer does not accept any liability for any damages
resulting from unintended use or inappropriate handling.
The manufacturer reserves his rights for modifying the product any
time in order to adjust it to law regulations, norms, directives, or due
to construction, trade aesthetic or other reasons, without notifying it
in advance.
together with drive inserting the projections in orices placed
in the container, and turn the lid (in clockwise direction) until
it is denitely blocked.
9
Connect the plug into the mains supply outlet.
10
Start-up the appliance and engage the appropriate gear.
After operation, switch off the appliance and unplug it
from the socket.
Disassembling the ice crusher, proceeds reverse to its
assembling.
The ice crusher blades are very sharp. Be very
careful during assembling, disassembling or
during cleaning.
Never exceed the maximum level of the ice
crusher input.
Never disassemble the lid from the container
before the disc stops rotating.
Operational tips
Maximum level of input of the ice crusher container
corresponds with the capacity of 450 ml.
Shake the appliance in case the products are clogged
over the disc.
In case the products get stuck to the inner wall of the
mini food processor container hindering or blocking
ejection of grinded product out of the upper container of
the ice crusher:
Switch off the appliance.
Remove the drive with the lid and container of ice
or – other products crusher.
Remove the products out of the mini food processor
walls.
Re-assemble the appliance - as dened above and
continue the operation.
Possible usage of the appliance
You can use products (i.e. fruit) grinded with the ice crusher
to prepare iceŁcream, yoghurts, desserts.
Recommended granulation level for given product
Product*
Recommended
gear**
Granulation
level
5 I-II
5 I
* The maximum level of input to the ice crusher container corresponds
with the capacity of 450 ml.
** Do not use the ice crusher longer than 2 min.
After operation (Fig. M)
Switch the mixer off and unplug it.
Depending on assembled equipment:
1
Push the whisks or mixers out with a pushing button.
2
Disassemble the liquidizing disc from the whisk.
Disassemble the mixing adapter or mixing cup in reverse
way to assembling it.
3
Deect the stand head with the motor part back. Turn
the clamp knob in counter clockwise direction as much as
possible and put the motor out of the head fasteners.
Wind the cord onto the motor.
Cleaning and maintenance
Remember to unplug before clearing and maintenance.
Clean the whisks and mixers with warm water with
cleaning agents.
Clean the mixing adapter and mixing cup by mixing
clean, warm water (after plugging the mixer to mains
supply).
Clean the cogged rim of rotational bowl with dishes
cleaning brush.
Do not wash the mixing adapter or the mixing cup in
dishwasher.
Turn the bowl upside down after cleaning and pour out
the water, which could remain under the cogged rim.
Before cleaning the steel bowl (type 481.64MM only)
disassemble the toothed wheel rim proceeding in reverse
to the assembly instruction (Fig. H).
Dry the mixer equipment after cleaning and store in dry
place.
Clean the motor or stand casing with dump cloth and
then dry it.
Ecology – environment protection
Each user can protect the natural environment. It is neither
difcult nor expensive. In order to do it: Put the cardboard
packing into recycling paper container, Put the polyethylene
(PE) bags into container for plastic.
It is not allowed to dispose worn out
batteries to domestic waste disposal.
You should bring them to waste batteries
collection point or to the outlet.
When worn out, dispose the appliance to
particular disposal centre, because of the
dangerous elements of this appliance, which
can be hazardous for natural environment.
Please do not dispose into domestic waste disposal!!!
H
2
O
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 481 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 481 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info