To set or change the password, it is fi rst necessary to enter the previous one and then enter your new one. Upon purchase,
the password entered by the manufacturer consists of four numbers (0000).
Important
When entering the password, you will be prompted to re-enter the password in order to ensure that it has been set correctly.
In order to not forget the password, choose a number combination that is easy to remember.
START PASSWORD: This function allows defi ning whether you want to enter a password each time the robot is turned on after a period of
inactivity (e.g. storing away for winter).
-
No: There is no need to enter a password each time the robot is turned on. The password will only be required to disable the alarm. The
robot requires the password to confi rm this parameter.
-
Yes: The password will be required each time the robot is started.
WORK MODE – PROGRAMMING MODE
Function for setting the operating mode of the robot. The robot automatically returns to “AUTOMATIC” mode when turned “off.”
•
Automatic: Normal operating mode. The robot recognises the perimeter wire and returns to the charging station whenever necessary.
•
Closed area: Operating mode in closed areas with no charging station. For the correct way to use this mode, see “USE OF ROBOT IN
CLOSED AREAS WITH NO CHARGING STATON.”
•
No border: Operating mode without recognition of the perimeter wire, which is only used if you want to use the robot in small areas enclosed
by a wall or fence without the perimeter wire installed, under supervision of the customer and controlled by the remote control.
LANGUAGE OPTIONS – PROGRAMMING MODE
LANGUAGE: function for selecting the language to use for the messages and user menu. Scroll through the various options with the “+” or “-”
key and confi rm with “Enter” (G).
•
DATE FORMAT
•
TIME FORMAT
•
DISTANCE FORMAT
These functions allow personalising the date, time and distance format.
INITIAL STARTUP – AUTOMATIC MODE
The start-up of the automatic cycle is executed on the initial start-up or
after a period of inactivity.
1. Check that the height of the lawn surface to mow is compatible with the
correct functioning of the robot (see “Technical Specifi cations”).
2. Adjust the cutting height as desired (see “Adjustment of Cutting
Height“).
3. Check that the work area has been correctly marked and that there
are no impediments to the regular functioning of the robot as indicated
in the section “Preparation and Marking the Boundaries of the Work
Areas” and following sections.
4. Position the robot inside the charging station.
5. Press the ON key and wait a few seconds for the robot to turn on
completely.
“ON” KEY (A)
“START/PAUSE” KEY (B)
“OFF/STOP” KEY (C)
6. If starting the robot for the fi rst time, it is necessary to program the settings. However, if starting the robot after a long period of inactivity, check
that the programmed functions correspond to the actual state of the lawn to mow (e.g. addition of a pool, plants, etc.) (see “Programming
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for ZCS 9L2BL at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of ZCS 9L2BL in the language / languages: English as an attachment in your email.
The manual is 10,32 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
