517530
26
Zoom out
Zoom in
Previous page
1/36
Next page
26
User’s manual
EN
1. Press the ON key (A).
2. Enter the password (if prompted) (See “Password Entry”).
3. The “PAUSE” function appears on the display.
4. Enter the programming menu and select “WORK MODE.” Select “CLOSED AREA” and
the words “CLOSED AREA – 60 Min” (default value) will appear on the display.
5. Press either the “+” or “-” key to set the minutes.
6. Press “Enter” to con rm.
7. Press the “Start/Pause” key (B) to exit the programming mode and then restart the
robot. After the set time, the robot safely stops next to the perimeter wire.
8. Restore the normal functioning of the robot as described in chapter “INITITAL START-
UP – AUTOMATIC MODE.”.
STARTING THE ROBOT WITHOUT THE PERIMETER WIRE
This mode can be executed with the remote control to mow areas completely surrounded by fences or small areas whose boundaries cannot be
marked or for practical demonstrations on the functioning of the robot.
Important
When using the robot without the perimeter wire, make sure the robot does not run into obstacles, corners or dangerous
objects.
1. Press the ON key (A).
2. Enter the password (if prompted) (See “Password Entry”).
3. Press “Enter” to enter into programming mode. Scroll through the
items until reaching “WORK MODE” Set the option “NO BORDER”
Press either the “+” or “-” key to set the working minutes of the robot.
4. Press “Enter” to con rm the selection.
5. Press “Start/Pause” (B) several times to exit from the menu and to
restart the robot.
6. Manoeuvre the robot using the remote control.
7. At the end of mowing, press the “OFF/ STOP” key (C) to safely stop the
robot (see “Robot Safety Stop”).
“ON” KEY (A) “START/PAUSE” KEY (B)
“OFF/STOP” KEY (C)
Important
It is recommended to move the robot with the remote control when mowing inside a narrow, well-visible area and to make
sure there are no people or domestic animals next to the operating zones of the robot.
PASSWORD ENTRY
The robot can be protected by a password consisting of four numbers, which can be enabled, disabled and personalised by the user (see
“Programming Mode”).
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZCS 9L2BL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZCS 9L2BL in the language / languages: English as an attachment in your email.

The manual is 10,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZCS 9L2BL

ZCS 9L2BL User Manual - Dutch - 56 pages

ZCS 9L2BL User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info